lkml.org 
[lkml]   [2019]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: qcom_defconfig: add options for LG Nexus 5 phone
Date
Add wcn36xx wireless, msm vibrator, pm8941 power key, bq24190 charger,
spmi-iadc, spmi-vadc, mpu6515 gyroscope / accelerometer, and tsl2772
proximity / light drivers as modules to support the LG Nexus 5
(hammerhead) phone.

CFG80211 is changed to be a module to match MAC80211 since this isn't
required for initial bootup.

Device manager support is also added as a module since this is needed by
postmarketOS.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
arch/arm/configs/qcom_defconfig | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index bd6440f23493..7dc91e822537 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -50,7 +50,8 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
CONFIG_RFKILL=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -72,6 +73,8 @@ CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_ATL1C=y
@@ -85,6 +88,7 @@ CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_WCN36XX=m
CONFIG_BRCMFMAC=m
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
@@ -94,6 +98,8 @@ CONFIG_KEYBOARD_PMIC8XXX=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MSM_VIBRATOR=m
+CONFIG_INPUT_PM8941_PWRKEY=m
CONFIG_INPUT_PM8XXX_VIBRATOR=y
CONFIG_INPUT_PMIC8XXX_PWRKEY=y
CONFIG_INPUT_UINPUT=y
@@ -127,6 +133,7 @@ CONFIG_GPIO_SYSFS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_CHARGER_QCOM_SMBB=y
+CONFIG_CHARGER_BQ24190=m
CONFIG_THERMAL=y
CONFIG_QCOM_TSENS=y
CONFIG_MFD_PM8XXX=y
@@ -226,7 +233,11 @@ CONFIG_IIO=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_KXSD9=y
+CONFIG_QCOM_SPMI_IADC=m
+CONFIG_QCOM_SPMI_VADC=m
CONFIG_MPU3050_I2C=y
+CONFIG_INV_MPU6050_I2C=m
+CONFIG_TSL2772=m
CONFIG_AK8975=y
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_BMP280=y
--
2.17.2
\
 
 \ /
  Last update: 2019-02-10 13:17    [W:0.050 / U:5.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site