lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2/4] mmc: rework wp-gpio handling
Use MMC_CAP2_RO_ACTIVE_HIGH flag as indicator if GPIO line is to be
inverted compared to DT/platform-specified polarity. The flag is not
used after init in GPIO mode anyway. No functional changes intended.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
drivers/gpio/gpiolib-of.c | 4 ----
drivers/mmc/core/host.c | 11 ++++-------
drivers/mmc/core/slot-gpio.c | 3 +++
drivers/mmc/host/pxamci.c | 8 ++++----
drivers/mmc/host/sdhci-esdhc-imx.c | 13 +++++++------
5 files changed, 18 insertions(+), 21 deletions(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index dc27b1a88e93..b0b77e52e261 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -120,10 +120,6 @@ static void of_gpio_flags_quirks(struct device_node *np,
if (of_property_read_bool(np, "cd-inverted"))
*flags ^= OF_GPIO_ACTIVE_LOW;
}
- if (!strcmp(propname, "wp-gpios")) {
- if (of_property_read_bool(np, "wp-inverted"))
- *flags ^= OF_GPIO_ACTIVE_LOW;
- }
}
/*
* Some GPIO fixed regulator quirks.
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 105b7a7c0251..b3484def0a8b 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -176,7 +176,6 @@ int mmc_of_parse(struct mmc_host *host)
u32 bus_width, drv_type, cd_debounce_delay_ms;
int ret;
bool cd_cap_invert, cd_gpio_invert = false;
- bool ro_cap_invert, ro_gpio_invert = false;

if (!dev || !dev_fwnode(dev))
return 0;
@@ -255,9 +254,11 @@ int mmc_of_parse(struct mmc_host *host)
}

/* Parse Write Protection */
- ro_cap_invert = device_property_read_bool(dev, "wp-inverted");

- ret = mmc_gpiod_request_ro(host, "wp", 0, 0, &ro_gpio_invert);
+ if (device_property_read_bool(dev, "wp-inverted"))
+ host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
+ ret = mmc_gpiod_request_ro(host, "wp", 0, 0, NULL);
if (!ret)
dev_info(host->parent, "Got WP GPIO\n");
else if (ret != -ENOENT && ret != -ENOSYS)
@@ -266,10 +267,6 @@ int mmc_of_parse(struct mmc_host *host)
if (device_property_read_bool(dev, "disable-wp"))
host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;

- /* See the comment on CD inversion above */
- if (ro_cap_invert ^ ro_gpio_invert)
- host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
-
if (device_property_read_bool(dev, "cap-sd-highspeed"))
host->caps |= MMC_CAP_SD_HIGHSPEED;
if (device_property_read_bool(dev, "cap-mmc-highspeed"))
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index da2596c5fa28..582ec3d720f6 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -241,6 +241,9 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
return ret;
}

+ if (host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH)
+ gpiod_toggle_active_low(desc);
+
if (gpio_invert)
*gpio_invert = !gpiod_is_active_low(desc);

diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 024acc1b0a2e..b2bbcb09a49e 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -740,16 +740,16 @@ static int pxamci_probe(struct platform_device *pdev)
goto out;
}

+ if (!host->pdata->gpio_card_ro_invert)
+ mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL);
if (ret && ret != -ENOENT) {
dev_err(dev, "Failed requesting gpio_ro\n");
goto out;
}
- if (!ret) {
+ if (!ret)
host->use_ro_gpio = true;
- mmc->caps2 |= host->pdata->gpio_card_ro_invert ?
- 0 : MMC_CAP2_RO_ACTIVE_HIGH;
- }

if (host->pdata->init)
host->pdata->init(dev, pxamci_detect_irq, mmc);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 1c988d6a2433..f1b21d87ecea 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1381,13 +1381,14 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
host->mmc->parent->platform_data);
/* write_protect */
if (boarddata->wp_type == ESDHC_WP_GPIO) {
- err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL);
- if (err) {
- dev_err(mmc_dev(host->mmc),
- "failed to request write-protect gpio!\n");
- return err;
- }
host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
+ err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0);
+ if (err) {
+ dev_err(mmc_dev(host->mmc),
+ "failed to request write-protect gpio!\n");
+ return err;
+ }
}

/* card_detect */
--
2.20.1
\
 
 \ /
  Last update: 2019-12-09 22:10    [W:0.050 / U:3.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site