lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm64: dts: ls1028a: fix reboot node
Date
The reboot register isn't located inside the DCFG controller, but in its
own RST controller. Fix it.

Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
---

changes since v1:
- add fixes tag
- remove "ls1028a-rst" compatible string, because there is no actual
driver for it. It just use the syscon driver.

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 8b28fda2ca20..7825550b7cef 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -88,7 +88,7 @@

reboot {
compatible ="syscon-reboot";
- regmap = <&dcfg>;
+ regmap = <&rst>;
offset = <0xb0>;
mask = <0x02>;
};
@@ -178,6 +178,12 @@
little-endian;
};

+ rst: syscon@1e60000 {
+ compatible = "syscon";
+ reg = <0x0 0x1e60000 0x0 0x10000>;
+ little-endian;
+ };
+
scfg: syscon@1fc0000 {
compatible = "fsl,ls1028a-scfg", "syscon";
reg = <0x0 0x1fc0000 0x0 0x10000>;
--
2.20.1
\
 
 \ /
  Last update: 2019-12-09 19:48    [W:0.026 / U:15.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site