lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/4] mtd: spi-nor: Add Octal 8D-8D-8D mode support for Macronix mx25uw51245g
From
Date

Hi Vignesh,

> >
> > /*
> > + * Read configuration register 2, returning its value in the
> > + * location. Return the configuration register 2 value.
> > + * Returns negative if error occurred.
> > + */
> > +static int read_cr2(struct spi_nor *nor, u32 addr)
>
> Please prefix spi_nor_* for all new functions.
> Also, include manf name if its vendor specific.

okay, will fix it.

>
> > +{
> > + int ret;
> > +
> > + if (nor->spimem) {
> > + struct spi_mem_op op =
> > + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR2, 1),
> > + SPI_MEM_OP_ADDR(4, addr, 1),
> > + SPI_MEM_OP_DUMMY(4, 1),
> > + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1));
> > +
> > + if (spi_nor_protocol_is_8_8_8(nor->read_proto)) {
> > + op.cmd.buswidth = 8;
> > + op.addr.buswidth = 8;
> > + op.dummy.buswidth = 8;
> > + op.data.buswidth = 8;
> > + op.cmd.nbytes = 2;
> > +
> > + if (spi_nor_protocol_is_8D_8D_8D(nor->read_proto)) {
> > + op.dummy.nbytes *= 2;
> > + op.cmd.dtr = true;
> > + op.addr.dtr = true;
> > + op.dummy.dtr = true;
> > + op.data.dtr = true;
> > + }
> > +
> > + if (nor->ext_cmd_mode == EXT_CMD_IS_INVERSE)
> > + op.cmd.ext_opcode = ~SPINOR_OP_RDCR2;
> > + else
> > + op.cmd.ext_opcode = SPINOR_OP_RDCR2;
> > + }
> > +
> > + ret = spi_mem_exec_op(nor->spimem, &op);
> > + } else {
> > + ret = -ENOTSUPP;
> > + }
> > +
> > + if (ret < 0) {
> > + dev_err(nor->dev, "error %d reading CR\n", ret);
> > + return ret;
> > + }
> > +
> > + return nor->bouncebuf[0];
> > +}
> > +
> > +/*
> > * Write configuration register 2 one byte
> > * Returns negative if error occurred.
> > */
> > @@ -2275,10 +2325,72 @@ static int spi_nor_spansion_clear_sr_bp(struct
spi_nor *nor)
> > return 0;
> > }
> >
> > +static void
> > +spi_nor_set_read_settings(struct spi_nor_read_command *read,
> > + u8 num_mode_clocks,
> > + u8 num_wait_states,
> > + u8 opcode,
> > + enum spi_nor_protocol proto);
> > +
> > +static void
> > +spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
> > + u8 opcode,
> > + enum spi_nor_protocol proto);
> > +
> > +static void
> > +mx25uw51245g_default_init(struct spi_nor *nor)
> > +{
> > + struct spi_nor_flash_parameter *params = &nor->params;
> > +
> > + if (!(nor->spimem->spi->mode & (SPI_RX_OCTAL | SPI_TX_OCTAL)))
> > + return;
> > +
> > + /* Octal 8S-8S-8S mode */
> > + params->hwcaps.mask |= SNOR_HWCAPS_OPI_FULL_STR;
> > + spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8_8_8],
> > + 0, 20, SPINOR_OP_READ_8_8_8,
> > + SNOR_PROTO_8_8_8);
> > +
> > + spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8_8_8],
> > + SPINOR_OP_PP_8_8_8, SNOR_PROTO_8_8_8);
> > +
> > + /* Octal 8D-8D-8D mode */
> > + params->hwcaps.mask |= SNOR_HWCAPS_OPI_FULL_DTR;
> > + spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8D_8D_8D],
> > + 0, 20, SPINOR_OP_READ_8D_8D_8D,
> > + SNOR_PROTO_8_8_8_DTR);
> > +
> > +
spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8D_8D_8D],
> > + SPINOR_OP_PP_8D_8D_8D, SNOR_PROTO_8_8_8_DTR);
> > +
> > + nor->ext_cmd_mode = EXT_CMD_IS_INVERSE;
> > +}
>
> I don't see anything that is macronix specific here.. Can this be moved
to
> generic code with information parsed from SFDP table?

This mx25uw51245g device support SFDP command but returns an empty SFDP
page.

>
> > +
> > +static void
> > +mx25uw51245g_post_sfdp_fixups(struct spi_nor *nor)
> > +{
> > + struct spi_nor_flash_parameter *params = &nor->params;
> > + u8 cr2;
> > +
> > + cr2 = read_cr2(nor, CR2_REG0) & CR2_REG0_MODE_MASK;
> > +
> > + if (params->hwcaps.mask & SNOR_HWCAPS_OPI_FULL_DTR)
> > + cr2 |= CR2_REG0_MODE_OPI_DTR;
> > + else if (params->hwcaps.mask & SNOR_HWCAPS_OPI_FULL_STR)
> > + cr2 |= CR2_REG0_MODE_OPI_STR;
> > +
> > + write_cr2(nor, CR2_REG0, cr2);
> > +}
> > +
>
> I see this as a misuse of sfdp_fixups hook:
>
> * @post_sfdp: called after SFDP has been parsed (is also called for SPI
NORs
> * that do not support RDSFDP). Typically used to tweak
various
> * parameters that could not be extracted by other means
(i.e.
> * when information provided by the SFDP/flash_info tables
are
> * incomplete or wrong).
> *
>
>
> This should only tweak options parsed by SFDP and not be used to
> configure flash to a different mode. Please add a separate function
> to do so. See https://patchwork.kernel.org/patch/10638085/
>

okay.
My idea is that device changed to 8D-8D-8D stateful mode after SFDP
parsed.
But if SFDP page table is broken in device and driver will just configure
the device into 8D-8D-8D mode directly.


thanks for your time & comments.

Mason

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information
and/or personal data, which is protected by applicable laws. Please be
reminded that duplication, disclosure, distribution, or use of this e-mail
(and/or its attachments) or any part thereof is prohibited. If you receive
this e-mail in error, please notify us immediately and delete this mail as
well as its attachment(s) from your system. In addition, please be
informed that collection, processing, and/or use of personal data is
prohibited unless expressly permitted by personal data protection laws.
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================

\
 
 \ /
  Last update: 2019-12-09 08:04    [W:0.047 / U:4.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site