lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3
Date
RDU2 production units come with resistor connecting WP pin to
correpsonding GPIO DNPed for both SD card slots. Drop any WP related
configuration and mark both slots with "disable-wp".

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7531f0595bd1..d062c86e0762 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -743,7 +743,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
@@ -756,7 +756,7 @@
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
@@ -1180,7 +1180,6 @@
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040
>;
};
@@ -1193,7 +1192,6 @@
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040

>;
--
2.21.0
\
 
 \ /
  Last update: 2019-12-09 17:51    [W:0.041 / U:2.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site