[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] phy: ti: j721e-wiz: Add support for DisplayPort mode
The wiz wrapper need slightly different configuration when the wrapped
serdes is used for DisplayPort. This series adds devicetree properties
for selecting the mode for each individual serdes lane separately.

The patch series should apply on top of these series:

Jyri Sarha (3):
dt-bindings: phy: Add PHY_TYPE_DP definition
dt-bindings: phy: Add lane<n>-mode property to WIZ (SERDES wrapper)
phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driver

.../bindings/phy/ti,phy-j721e-wiz.yaml | 12 ++++
drivers/phy/ti/phy-j721e-wiz.c | 55 +++++++++++++++++--
include/dt-bindings/phy/phy.h | 1 +
3 files changed, 64 insertions(+), 4 deletions(-)

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

 \ /
  Last update: 2019-12-09 17:21    [W:0.060 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site