lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 6/6] MIPS: CU1000: Add devicetree & config with PDMA/MSC/RTC/WDT/NET enabled.
Hi Zhou,

You modify here in patch [06/06] two files that were introduced in
[04/06]. Just merge the two patches into one then, and make it last in
the patchset.

-Paul


Le lun., déc. 9, 2019 at 21:00, 周琰杰 (Zhou Yanjie)
<zhouyanjie@wanyeetech.com> a écrit :
> Add the CU1000 Neo devicetree and defconfig with PDMA, MMC, RTC, WDT
> and NET enabled.
>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
> ---
>
> Notes:
> v7:
> New patch, merge[06/12],[08/12],[10/12],[12/12] in v6.
>
> arch/mips/boot/dts/ingenic/cu1000-neo.dts | 47
> +++++++++++++++++++++++++++++++
> arch/mips/configs/cu1000-neo_defconfig | 17 +++++++++--
> 2 files changed, 62 insertions(+), 2 deletions(-)
>
> diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts
> b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
> index 6f1a7e9..b0733da 100644
> --- a/arch/mips/boot/dts/ingenic/cu1000-neo.dts
> +++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
> @@ -43,10 +43,57 @@
> status = "okay";
> };
>
> +&mac {
> + phy-mode = "rmii";
> + phy-handle = <&lan8720a>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pins_mac>;
> +
> + snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 30000>;
> +
> + status = "okay";
> +};
> +
> +&mdio {
> + status = "okay";
> +
> + lan8720a: ethernet-phy@0 {
> + compatible = "ethernet-phy-id0007.c0f0",
> "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> +};
> +
> +&msc0 {
> + bus-width = <8>;
> + max-frequency = <50000000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pins_msc0>;
> +
> + non-removable;
> +
> + status = "okay";
> +};
> +
> &pinctrl {
> pins_uart2: uart2 {
> function = "uart2";
> groups = "uart2-data-d";
> bias-disable;
> };
> +
> + pins_mac: mac {
> + function = "mac";
> + groups = "mac";
> + bias-disable;
> + };
> +
> + pins_msc0: msc0 {
> + function = "mmc0";
> + groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
> + bias-disable;
> + };
> };
> diff --git a/arch/mips/configs/cu1000-neo_defconfig
> b/arch/mips/configs/cu1000-neo_defconfig
> index 4fafe92..9f988ed 100644
> --- a/arch/mips/configs/cu1000-neo_defconfig
> +++ b/arch/mips/configs/cu1000-neo_defconfig
> @@ -16,8 +16,6 @@ CONFIG_CGROUP_DEVICE=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_NAMESPACES=y
> CONFIG_USER_NS=y
> -CONFIG_BLK_DEV_INITRD=y
> -CONFIG_INITRAMFS_SOURCE="arch/mips/boot/ramdisk.cpio.gz"
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS_ALL=y
> @@ -35,11 +33,17 @@ CONFIG_HZ_100=y
> # CONFIG_COMPACTION is not set
> CONFIG_CMA=y
> CONFIG_CMA_AREAS=7
> +CONFIG_NET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> CONFIG_UEVENT_HELPER=y
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_DEVTMPFS=y
> # CONFIG_FW_LOADER is not set
> # CONFIG_ALLOW_DEV_COREDUMP is not set
> +CONFIG_NETDEVICES=y
> +CONFIG_STMMAC_ETH=y
> +CONFIG_SMSC_PHY=y
> # CONFIG_INPUT_MOUSEDEV is not set
> # CONFIG_INPUT_KEYBOARD is not set
> # CONFIG_INPUT_MOUSE is not set
> @@ -55,17 +59,26 @@ CONFIG_SERIAL_8250_INGENIC=y
> CONFIG_SERIAL_OF_PLATFORM=y
> # CONFIG_HW_RANDOM is not set
> CONFIG_GPIO_SYSFS=y
> +CONFIG_WATCHDOG=y
> +CONFIG_JZ4740_WDT=y
> # CONFIG_HWMON is not set
> # CONFIG_LCD_CLASS_DEVICE is not set
> # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
> # CONFIG_VGA_CONSOLE is not set
> # CONFIG_HID is not set
> # CONFIG_USB_SUPPORT is not set
> +CONFIG_MMC=y
> +CONFIG_MMC_JZ4740=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_JZ4740=y
> +CONFIG_DMADEVICES=y
> +CONFIG_DMA_JZ4780=y
> # CONFIG_IOMMU_SUPPORT is not set
> CONFIG_NVMEM=y
> CONFIG_NVMEM_SYSFS=y
> CONFIG_EXT4_FS=y
> # CONFIG_DNOTIFY is not set
> +CONFIG_AUTOFS_FS=y
> CONFIG_PROC_KCORE=y
> # CONFIG_PROC_PAGE_MONITOR is not set
> CONFIG_TMPFS=y
> --
> 2.7.4
>


\
 
 \ /
  Last update: 2019-12-09 16:08    [W:0.058 / U:26.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site