lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] arm64: dts: ls1028a: add missing sai nodes
On Sat, Nov 23, 2019 at 09:13:15PM +0100, Michael Walle wrote:
> The LS1028A has six SAI cores.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 42 +++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index f2e71fd57b20..6730922c2d47 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -534,6 +534,20 @@
> status = "disabled";
> };
>
> + sai3: audio-controller@f120000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf120000 0x0 0x10000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 8>,
> + <&edma0 1 7>;
> + status = "disabled";
> + };
> +
> sai4: audio-controller@f130000 {
> #sound-dai-cells = <0>;
> compatible = "fsl,vf610-sai";
> @@ -548,6 +562,34 @@
> status = "disabled";
> };
>
> + sai5: audio-controller@f140000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf140000 0x0 0x10000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 12>,
> + <&edma0 1 11>;
> + status = "disabled";
> + };
> +
> + sai6: audio-controller@f150000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf150000 0x0 0x10000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 14>,
> + <&edma0 1 13>;
> + status = "disabled";
> + };
> +
> tmu: tmu@1f00000 {

Not sure what your base is, but I have tmu@1f80000. And that makes
the patch applying fail here.

Shawn

> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f80000 0x0 0x10000>;
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-12-09 07:32    [W:0.079 / U:45.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site