lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/10] extcon: arizona: Invert logic of check in arizona_hpdet_do_id
Date
Invert the check of hpdet_acc_id at the top of arizona_hpdet_do_id to
reduce the identation within the function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
drivers/extcon/extcon-arizona.c | 92 ++++++++++++++++++++---------------------
1 file changed, 45 insertions(+), 47 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 3f7ced35e0b86..a0135f44cba1e 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -533,67 +533,65 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;

+ if (!arizona->pdata.hpdet_acc_id)
+ return 0;
+
/*
* If we're using HPDET for accessory identification we need
* to take multiple measurements, step through them in sequence.
*/
- if (arizona->pdata.hpdet_acc_id) {
- info->hpdet_res[info->num_hpdet_res++] = *reading;
+ info->hpdet_res[info->num_hpdet_res++] = *reading;

- /* Only check the mic directly if we didn't already ID it */
- if (id_gpio && info->num_hpdet_res == 1) {
- dev_dbg(arizona->dev, "Measuring mic\n");
-
- regmap_update_bits(arizona->regmap,
- ARIZONA_ACCESSORY_DETECT_MODE_1,
- ARIZONA_ACCDET_MODE_MASK |
- ARIZONA_ACCDET_SRC,
- ARIZONA_ACCDET_MODE_HPR |
- info->micd_modes[0].src);
+ /* Only check the mic directly if we didn't already ID it */
+ if (id_gpio && info->num_hpdet_res == 1) {
+ dev_dbg(arizona->dev, "Measuring mic\n");

- gpio_set_value_cansleep(id_gpio, 1);
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_ACCESSORY_DETECT_MODE_1,
+ ARIZONA_ACCDET_MODE_MASK |
+ ARIZONA_ACCDET_SRC,
+ ARIZONA_ACCDET_MODE_HPR |
+ info->micd_modes[0].src);

- regmap_update_bits(arizona->regmap,
- ARIZONA_HEADPHONE_DETECT_1,
- ARIZONA_HP_POLL, ARIZONA_HP_POLL);
- return -EAGAIN;
- }
+ gpio_set_value_cansleep(id_gpio, 1);

- /* OK, got both. Now, compare... */
- dev_dbg(arizona->dev, "HPDET measured %d %d\n",
- info->hpdet_res[0], info->hpdet_res[1]);
+ regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+ ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+ return -EAGAIN;
+ }

- /* Take the headphone impedance for the main report */
- *reading = info->hpdet_res[0];
+ /* OK, got both. Now, compare... */
+ dev_dbg(arizona->dev, "HPDET measured %d %d\n",
+ info->hpdet_res[0], info->hpdet_res[1]);

- /* Sometimes we get false readings due to slow insert */
- if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) {
- dev_dbg(arizona->dev, "Retrying high impedance\n");
- info->num_hpdet_res = 0;
- info->hpdet_retried = true;
- arizona_start_hpdet_acc_id(info);
- pm_runtime_put(info->dev);
- return -EAGAIN;
- }
+ /* Take the headphone impedance for the main report */
+ *reading = info->hpdet_res[0];

- /*
- * If we measure the mic as high impedance
- */
- if (!id_gpio || info->hpdet_res[1] > 50) {
- dev_dbg(arizona->dev, "Detected mic\n");
- *mic = true;
- info->detecting = true;
- } else {
- dev_dbg(arizona->dev, "Detected headphone\n");
- }
+ /* Sometimes we get false readings due to slow insert */
+ if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) {
+ dev_dbg(arizona->dev, "Retrying high impedance\n");
+ info->num_hpdet_res = 0;
+ info->hpdet_retried = true;
+ arizona_start_hpdet_acc_id(info);
+ pm_runtime_put(info->dev);
+ return -EAGAIN;
+ }

- /* Make sure everything is reset back to the real polarity */
- regmap_update_bits(arizona->regmap,
- ARIZONA_ACCESSORY_DETECT_MODE_1,
- ARIZONA_ACCDET_SRC,
- info->micd_modes[0].src);
+ /*
+ * If we measure the mic as high impedance
+ */
+ if (!id_gpio || info->hpdet_res[1] > 50) {
+ dev_dbg(arizona->dev, "Detected mic\n");
+ *mic = true;
+ info->detecting = true;
+ } else {
+ dev_dbg(arizona->dev, "Detected headphone\n");
}

+ /* Make sure everything is reset back to the real polarity */
+ regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
+ ARIZONA_ACCDET_SRC, info->micd_modes[0].src);
+
return 0;
}

--
2.11.0
\
 
 \ /
  Last update: 2019-12-09 12:10    [W:0.050 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site