lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] hwmon: Driver for temperature sensors on SATA drives
From
Date
On 12/8/19 9:28 PM, Randy Dunlap wrote:
> Hi,
>
> On 12/8/19 9:21 PM, Guenter Roeck wrote:
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index 13a6b4afb4b3..4c63eb7ba96a 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -1346,6 +1346,16 @@ config SENSORS_RASPBERRYPI_HWMON
>> This driver can also be built as a module. If so, the module
>> will be called raspberrypi-hwmon.
>>
>> +config SENSORS_SATATEMP
>> + tristate "SATA hard disk drives with temperature sensors"
>> + depends on SCSI && ATA
>> + help
>> + If you say yes you get support for the temperature sensor on
>> + SATA hard disk drives.
>> +
>> + This driver can also be built as a module. If so, the module
>> + will be called smarttemp.
>
> Makefile seems to say satatemp.
>

Oops. Thanks for the note. Will fix.

Guenter

>> +
>> config SENSORS_SHT15
>> tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
>> depends on GPIOLIB || COMPILE_TEST
>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>> index 40c036ea45e6..fe55b8f76af9 100644
>> --- a/drivers/hwmon/Makefile
>> +++ b/drivers/hwmon/Makefile
>> @@ -148,6 +148,7 @@ obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
>> obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
>> obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
>> obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o
>> +obj-$(CONFIG_SENSORS_SATATEMP) += satatemp.o
>> obj-$(CONFIG_SENSORS_SHT15) += sht15.o
>> obj-$(CONFIG_SENSORS_SHT21) += sht21.o
>> obj-$(CONFIG_SENSORS_SHT3x) += sht3x.o
>
>

\
 
 \ /
  Last update: 2019-12-09 07:01    [W:0.063 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site