lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 03/18] phy: tegra: xusb: Add usb-role-switch support
From
Date


On 06-12-2019 20:24, Thierry Reding wrote:
> On Fri, Dec 06, 2019 at 04:20:06PM +0530, Nagarjuna Kristam wrote:
>> If usb-role-switch property is present in USB 2 port, register
>> usb-role-switch to receive usb role changes.
>>
>> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
>> ---
>> drivers/phy/tegra/Kconfig | 1 +
>> drivers/phy/tegra/xusb.c | 40 ++++++++++++++++++++++++++++++++++++++++
>> drivers/phy/tegra/xusb.h | 3 +++
>> 3 files changed, 44 insertions(+)
>>
>> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
>> index f9817c3..df07c4d 100644
>> --- a/drivers/phy/tegra/Kconfig
>> +++ b/drivers/phy/tegra/Kconfig
>> @@ -2,6 +2,7 @@
>> config PHY_TEGRA_XUSB
>> tristate "NVIDIA Tegra XUSB pad controller driver"
>> depends on ARCH_TEGRA
>> + select USB_CONN_GPIO
>> help
>> Choose this option if you have an NVIDIA Tegra SoC.
>>
>> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
>> index f98ec39..da60a63 100644
>> --- a/drivers/phy/tegra/xusb.c
>> +++ b/drivers/phy/tegra/xusb.c
>> @@ -523,6 +523,7 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
>> port->dev.type = &tegra_xusb_port_type;
>> port->dev.of_node = of_node_get(np);
>> port->dev.parent = padctl->dev;
>> + port->dev.driver = padctl->dev->driver;
>>
>> err = dev_set_name(&port->dev, "%s-%u", name, index);
>> if (err < 0)
>> @@ -532,6 +533,7 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
>> if (err < 0)
>> goto unregister;
>>
>> + dev_set_drvdata(&port->dev, port);
> You never seem to use dev_get_drvdata() to get at this. Also, you can
> get at it via container_of(), so this is only marginally useful to begin
> with.
>
Its actually used in API tegra_xusb_role_sw_set, but thats in patch 0004.
Will move this line to 0004 patch to align with the usage.

>> return 0;
>>
>> unregister:
>> @@ -541,6 +543,7 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
>>
>> static void tegra_xusb_port_unregister(struct tegra_xusb_port *port)
>> {
>> + usb_role_switch_unregister(port->usb_role_sw);
>> device_unregister(&port->dev);
>> }
>>
>> @@ -551,11 +554,39 @@ static const char *const modes[] = {
>> [USB_DR_MODE_OTG] = "otg",
>> };
>>
>> +static int tegra_xusb_role_sw_set(struct device *dev, enum usb_role role)
>> +{
>> + dev_dbg(dev, "%s calling notifier for role is %d\n", __func__, role);
>> +
>> + return 0;
>> +}
>> +
>> +static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
>> +{
>> + int err = 0;
>> + struct usb_role_switch_desc role_sx_desc = {
>> + .set = tegra_xusb_role_sw_set,
>> + .fwnode = dev_fwnode(&port->dev),
>> + };
>> +
>> + port->usb_role_sw = usb_role_switch_register(&port->dev,
>> + &role_sx_desc);
>> + if (IS_ERR(port->usb_role_sw)) {
>> + err = PTR_ERR(port->usb_role_sw);
>> + if (err != EPROBE_DEFER)
>> + dev_err(&port->dev, "Failed to register USB role SW: %d",
>> + err);
>> + }
>> +
>> + return err;
>> +}
>> +
>> static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
>> {
>> struct tegra_xusb_port *port = &usb2->base;
>> struct device_node *np = port->dev.of_node;
>> const char *mode;
>> + int err;
>>
>> usb2->internal = of_property_read_bool(np, "nvidia,internal");
>>
>> @@ -572,6 +603,15 @@ static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
>> usb2->mode = USB_DR_MODE_HOST;
>> }
>>
>> + if (of_property_read_bool(np, "usb-role-switch")) {
>> + /* populate connector entry */
>> + of_platform_populate(np, NULL, NULL, &port->dev);
> I think we want to clean this up on failure, don't we? Otherwise we
> might end up trying to register the same platform device multiple times.
> Also, do we want to depopulate when the port is removed again?
>
> Have you tried unloading and loading the driver to see if that works?
>
> Thierry
>
platform needs to be depopulate on error/remove and will add corresponding code.
padctl driver can be unloaded after unloading all dependent drivers. re-loading
caused failure of usb role switch due to missing depopulate. Will update changes
to consider the same.

Thanks,
Nagarjuna
>> +
>> + err = tegra_xusb_setup_usb_role_switch(port);
>> + if (err < 0)
>> + return err;
>> + }
>> +
>> usb2->supply = devm_regulator_get(&port->dev, "vbus");
>> return PTR_ERR_OR_ZERO(usb2->supply);
>> }
>> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
>> index da94fcc..9f27899 100644
>> --- a/drivers/phy/tegra/xusb.h
>> +++ b/drivers/phy/tegra/xusb.h
>> @@ -12,6 +12,7 @@
>> #include <linux/workqueue.h>
>>
>> #include <linux/usb/otg.h>
>> +#include <linux/usb/role.h>
>>
>> /* legacy entry points for backwards-compatibility */
>> int tegra_xusb_padctl_legacy_probe(struct platform_device *pdev);
>> @@ -266,6 +267,8 @@ struct tegra_xusb_port {
>> struct list_head list;
>> struct device dev;
>>
>> + struct usb_role_switch *usb_role_sw;
>> +
>> const struct tegra_xusb_port_ops *ops;
>> };
>>
>> --
>> 2.7.4
>>

\
 
 \ /
  Last update: 2019-12-10 04:51    [W:0.043 / U:11.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site