lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 07/14] soc: mediatek: cmdq: add assign function
From
Date
Hi, Dennis:

On Wed, 2019-11-27 at 09:58 +0800, Dennis YC Hsieh wrote:
> Add assign function in cmdq helper which assign constant value into
> internal register by index.
>
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 24 +++++++++++++++++++++++-
> include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
> include/linux/soc/mediatek/mtk-cmdq.h | 18 ++++++++++++++++++
> 3 files changed, 42 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 8421b4090304..9cc234f08ec5 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -14,6 +14,7 @@
> #define CMDQ_EOC_IRQ_EN BIT(0)
> #define CMDQ_EOC_CMD ((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> << 32 | CMDQ_EOC_IRQ_EN)
> +#define CMDQ_REG_TYPE 1
>
> struct cmdq_instruction {
> union {
> @@ -23,8 +24,17 @@ struct cmdq_instruction {
> union {
> u16 offset;
> u16 event;
> + u16 reg_dst;
> + };
> + union {
> + u8 subsys;
> + struct {
> + u8 sop:5;
> + u8 arg_c_t:1;
> + u8 arg_b_t:1;
> + u8 dst_t:1;
> + };
> };
> - u8 subsys;
> u8 op;
> };
>
> @@ -279,6 +289,18 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
> }
> EXPORT_SYMBOL(cmdq_pkt_poll_mask);
>
> +int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
> +{
> + struct cmdq_instruction inst = { {0} };
> +
> + inst.op = CMDQ_CODE_LOGIC;
> + inst.dst_t = CMDQ_REG_TYPE;
> + inst.reg_dst = reg_idx;
> + inst.value = value;
> + return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_assign);
> +
> static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> {
> struct cmdq_client *cl = pkt->cl;
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index dfe5b2eb85cc..121c3bb6d3de 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -59,6 +59,7 @@ enum cmdq_code {
> CMDQ_CODE_JUMP = 0x10,
> CMDQ_CODE_WFE = 0x20,
> CMDQ_CODE_EOC = 0x40,
> + CMDQ_CODE_LOGIC = 0xa0,
> };
>
> enum cmdq_cb_status {
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index a74c1d5acdf3..c66b3a0da2a2 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -12,6 +12,10 @@
> #include <linux/timer.h>
>
> #define CMDQ_NO_TIMEOUT 0xffffffffu
> +#define CMDQ_SPR_TEMP 0
> +#define CMDQ_SPR1 1
> +#define CMDQ_SPR2 2
> +#define CMDQ_SPR3 3

These does not relate to assign function, so remove them.

Regards,
CK

>
> struct cmdq_pkt;
>
> @@ -152,6 +156,20 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
> */
> int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
> u16 offset, u32 value, u32 mask);
> +
> +/**
> + * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE
> + * to execute an instruction that set a constant value into
> + * internal register and use as value, mask or address in
> + * read/write instruction.
> + * @pkt: the CMDQ packet
> + * @reg_idx: the CMDQ internal register ID
> + * @value: the specified value
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
> +
> /**
> * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
> * packet and call back at the end of done packet

\
 
 \ /
  Last update: 2019-12-10 04:24    [W:0.173 / U:9.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site