lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/9] SoC and defconfig support for SAM9X60
On 29/11/2019 15:51:36+0200, Claudiu Beznea wrote:
> Hi,
>
> This series enables proper support for SAM9X60 in Kconfig and
> defconfig.
>
> Thank you,
> Claudiu Beznea
>
> Changes in v3:
> - move patch "ARM: at91: Kconfig: add config flag for SAM9X60 SoC" before
> the patches that uses CONFIG_SOC_SAM9X60
> - sqash defconfig patches (except the savedefconfig one)
>
> Changes in v2:
> - cahnged cover letter title; previously it was:
> "add defconfig support for SAM9X60"
> - have new entry in arch/arm/mach-at91/Kconfig for SOC_SAM9X60
> independent of SOC_AT91SAM9 to be able to select only necessary
> config flags for SAM9X60 (patches 02/17, 03/17)
> - select POWER_RESET_AT91_RESET and POWER_RESET_AT91_SAMA5D2_SHDWC
> as for SAMA5D2 (patches 04/17, 05/17)
> - select DEBUG_AT91_RM9200_DBGU (patch 06/17)
> - shaped a bit the patches titles and commit desciptions for defconfig
> patches (patches 09-17/17)
>
> Claudiu Beznea (9):
> ARM: at91: Kconfig: add sam9x60 pll config flag
> ARM: at91: Kconfig: add config flag for SAM9X60 SoC
> ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
> drivers: soc: atmel: move sam9x60 under its own config flag
> power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60
> drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC for sam9x60
> ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60
> ARM: at91/defconfig: use savedefconfig
> ARM: at91/defconfig: enable config flags for sam9x60 SoC
>
> arch/arm/Kconfig.debug | 6 ++---
> arch/arm/configs/at91_dt_defconfig | 55 ++++++++++++++++++--------------------
> arch/arm/mach-at91/Kconfig | 24 +++++++++++++++--
> arch/arm/mach-at91/Makefile | 1 +
> arch/arm/mach-at91/at91sam9.c | 18 -------------
> arch/arm/mach-at91/pm.c | 2 +-
> arch/arm/mach-at91/sam9x60.c | 34 +++++++++++++++++++++++
> drivers/power/reset/Kconfig | 4 +--
> drivers/soc/atmel/soc.c | 5 ++--
> 9 files changed, 92 insertions(+), 57 deletions(-)
> create mode 100644 arch/arm/mach-at91/sam9x60.c
>
Applied, thanks.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2019-12-10 00:46    [W:0.052 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site