lkml.org 
[lkml]   [2019]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/5] power: supply: sc27xx: Optimize the battery resistance with measuring temperature
Date
From: Yuanjiang Yu <yuanjiang.yu@unisoc.com>

Optimize the battery internal resistance in a certain temerature to
get a accurate battery internal resistance.

Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
drivers/power/supply/sc27xx_fuel_gauge.c | 32 ++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index bc8f5bd..221b6fb 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -81,9 +81,11 @@
* @max_volt: the maximum constant input voltage in millivolt
* @min_volt: the minimum drained battery voltage in microvolt
* @table_len: the capacity table length
+ * @resist_table_len: the resistance table length
* @cur_1000ma_adc: ADC value corresponding to 1000 mA
* @vol_1000mv_adc: ADC value corresponding to 1000 mV
* @cap_table: capacity table with corresponding ocv
+ * @resist_table: resistance percent table with corresponding temperature
*/
struct sc27xx_fgu_data {
struct regmap *regmap;
@@ -103,15 +105,18 @@ struct sc27xx_fgu_data {
int max_volt;
int min_volt;
int table_len;
+ int resist_table_len;
int cur_1000ma_adc;
int vol_1000mv_adc;
struct power_supply_battery_ocv_table *cap_table;
+ struct power_supply_resistance_temp_table *resist_table;
};

static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity);
static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data,
int cap, bool int_mode);
static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap);
+static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp);

static const char * const sc27xx_charger_supply_name[] = {
"sc2731_charger",
@@ -434,7 +439,7 @@ static int sc27xx_fgu_get_current(struct sc27xx_fgu_data *data, int *val)

static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val)
{
- int vol, cur, ret;
+ int vol, cur, ret, temp, resistance;

ret = sc27xx_fgu_get_vbat_vol(data, &vol);
if (ret)
@@ -444,8 +449,19 @@ static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val)
if (ret)
return ret;

+ resistance = data->internal_resist;
+ if (data->resist_table_len > 0) {
+ ret = sc27xx_fgu_get_temp(data, &temp);
+ if (ret)
+ return ret;
+
+ resistance = power_supply_temp2resist_simple(data->resist_table,
+ data->resist_table_len, temp);
+ resistance = data->internal_resist * resistance / 100;
+ }
+
/* Return the battery OCV in micro volts. */
- *val = vol * 1000 - cur * data->internal_resist;
+ *val = vol * 1000 - cur * resistance;

return 0;
}
@@ -929,6 +945,18 @@ static int sc27xx_fgu_hw_init(struct sc27xx_fgu_data *data)
if (!data->alarm_cap)
data->alarm_cap += 1;

+ data->resist_table_len = info.resist_table_size;
+ if (data->resist_table_len > 0) {
+ data->resist_table = devm_kmemdup(data->dev, info.resist_table,
+ data->resist_table_len *
+ sizeof(struct power_supply_resistance_temp_table),
+ GFP_KERNEL);
+ if (!data->resist_table) {
+ power_supply_put_battery_info(data->battery, &info);
+ return -ENOMEM;
+ }
+ }
+
power_supply_put_battery_info(data->battery, &info);

ret = sc27xx_fgu_calibration(data);
--
1.7.9.5
\
 
 \ /
  Last update: 2019-12-09 04:57    [W:0.038 / U:3.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site