lkml.org 
[lkml]   [2019]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v11 3/3] PCI: artpec6: Configure FTS with dwc helper function
Date
Use DesignWare helper functions to configure Fast Training
Sequence. Drop the respective code in the driver.

Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
---
drivers/pci/controller/dwc/pcie-artpec6.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c
index 9e2482bd7b6d..28d5a1095200 100644
--- a/drivers/pci/controller/dwc/pcie-artpec6.c
+++ b/drivers/pci/controller/dwc/pcie-artpec6.c
@@ -51,9 +51,6 @@ static const struct of_device_id artpec6_pcie_of_match[];
#define ACK_N_FTS_MASK GENMASK(15, 8)
#define ACK_N_FTS(x) (((x) << 8) & ACK_N_FTS_MASK)

-#define FAST_TRAINING_SEQ_MASK GENMASK(7, 0)
-#define FAST_TRAINING_SEQ(x) (((x) << 0) & FAST_TRAINING_SEQ_MASK)
-
/* ARTPEC-6 specific registers */
#define PCIECFG 0x18
#define PCIECFG_DBG_OEN BIT(24)
@@ -313,10 +310,7 @@ static void artpec6_pcie_set_nfts(struct artpec6_pcie *artpec6_pcie)
* Set the Number of Fast Training Sequences that the core
* advertises as its N_FTS during Gen2 or Gen3 link training.
*/
- val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
- val &= ~FAST_TRAINING_SEQ_MASK;
- val |= FAST_TRAINING_SEQ(180);
- dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+ dw_pcie_link_set_n_fts(pci, 180);
}

static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)
--
2.11.0
\
 
 \ /
  Last update: 2019-12-09 04:20    [W:0.044 / U:4.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site