lkml.org 
[lkml]   [2019]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] ARM: dts: meson8b: add the DDR clock controller
Date
Add the DDR clock controller and pass it's DDR_CLKID_DDR_PLL to the main
(HHI) clock controller as "ddr_clk". The "ddr_clk" is used as one of the
inputs for the audio clock muxes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8b.dtsi | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 1934666ff60f..8ac8bdfaf58f 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -4,6 +4,7 @@
* Author: Carlo Caione <carlo@endlessm.com>
*/

+#include <dt-bindings/clock/meson8-ddr-clkc.h>
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8b-gpio.h>
#include <dt-bindings/reset/amlogic,meson8b-reset.h>
@@ -172,6 +173,14 @@ mmcbus: bus@c8000000 {
#size-cells = <1>;
ranges = <0x0 0xc8000000 0x8000>;

+ ddr_clkc: clock-controller@400 {
+ compatible = "amlogic,meson8b-ddr-clkc";
+ reg = <0x400 0x20>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ #clock-cells = <1>;
+ };
+
dmcbus: bus@6000 {
compatible = "simple-bus";
reg = <0x6000 0x400>;
@@ -434,8 +443,8 @@ &gpio_intc {
&hhi {
clkc: clock-controller {
compatible = "amlogic,meson8-clkc";
- clocks = <&xtal>;
- clock-names = "xtal";
+ clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+ clock-names = "xtal", "ddr_pll";
#clock-cells = <1>;
#reset-cells = <1>;
};
--
2.24.0
\
 
 \ /
  Last update: 2019-12-08 19:07    [W:0.043 / U:1.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site