lkml.org 
[lkml]   [2019]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFCv1 0/8] RK3399 clean shutdown issue
Date
Am Samstag, 7. Dezember 2019, 06:07:49 CET schrieb Anand Moon:
> Hi Heiko,
>
> On Sat, 7 Dec 2019 at 04:02, Heiko Stuebner <heiko@sntech.de> wrote:
> >
> > Hi Anand,
> >
> > Am Freitag, 6. Dezember 2019, 19:45:28 CET schrieb Anand Moon:
> > > Most of the RK3399 SBC boards do not perform clean
> > > shutdown and clean reboot.
> > >
> > > These patches try to help resolve the issue with proper
> > > shutdown by turning off the PMIC.
> > >
> > > For reference
> > > RK805 PMCI data sheet:
> > > [0] http://rockchip.fr/RK805%20datasheet%20V1.3.pdf
> > > RK808 PMIC data sheet:
> > > [1] http://rockchip.fr/RK808%20datasheet%20V1.4.pdf
> > > RK817 PMIC data sheet:
> > > [2] http://rockchip.fr/RK817%20datasheet%20V1.01.pdf
> > > RK818 PMIC data sheet:
> > > [3] http://rockchip.fr/RK818%20datasheet%20V1.0.pdf
> > >
> > > Reboot issue:
> > > My guess is that we need to some proper sequence of
> > > setting to PMCI to perform clean.
> > >
> > > If you have any input please share them.
> >
> > The rk8xx pmics may not on all devices be responsible for powering down
> > the device. That is what the system-power-controller dt-property is for.
> >
> > So that property is there for a reason - to indicate that the pmic is
> > responsible for power-off-handling.
> >
> > Heiko
> >
>
> Ok, my intent was to have common framework for
> shutdown, restart, suspend, resume routines.

That is a great goal actually :-)

I guess just keep in mind that it should only handle power-off
if instructed by the devicetree property.


\
 
 \ /
  Last update: 2019-12-07 12:46    [W:0.033 / U:8.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site