lkml.org 
[lkml]   [2019]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFCv1 2/8] mfd: rk808: use syscore for RK805 PMIC shutdown
Date
Use common syscore_shutdown for RK805 PMIC to do
clean I2C shutdown, drop the unused pm_pwroff_prep_fn
and pm_pwroff_fn function pointers.

Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
drivers/mfd/rk808.c | 33 +++++++++++++++++----------------
1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index e637f5bcc8bb..713d989064ba 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -467,16 +467,6 @@ static void rk808_update_bits(unsigned int reg, unsigned int mask,
"can't write to register 0x%x: %x!\n", reg, ret);
}

-static void rk805_device_shutdown(void)
-{
- rk808_update_bits(RK805_DEV_CTRL_REG, DEV_OFF, DEV_OFF);
-}
-
-static void rk805_device_shutdown_prepare(void)
-{
- rk808_update_bits(RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SHUTDOWN_FUN);
-}
-
static void rk808_device_shutdown(void)
{
rk808_update_bits(RK808_DEVCTRL_REG, DEV_OFF_RST, DEV_OFF_RST);
@@ -491,10 +481,23 @@ static void rk8xx_syscore_shutdown(void)
{
struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);

- if (system_state == SYSTEM_POWER_OFF &&
- (rk808->variant == RK809_ID || rk808->variant == RK817_ID)) {
- rk808_update_bits(RK817_SYS_CFG(3), RK817_SLPPIN_FUNC_MSK,
- SLPPIN_DN_FUN);
+ if (system_state == SYSTEM_POWER_OFF) {
+ dev_info(&rk808_i2c_client->dev, "System Shutdown Event\n");
+
+ switch (rk808->variant) {
+ case RK805_ID:
+ rk808_update_bits(RK805_GPIO_IO_POL_REG,
+ SLP_SD_MSK, SHUTDOWN_FUN);
+ rk808_update_bits(RK805_DEV_CTRL_REG, DEV_OFF, DEV_OFF);
+ break;
+ case RK809_ID:
+ case RK817_ID:
+ rk808_update_bits(RK817_SYS_CFG(3),
+ RK817_SLPPIN_FUNC_MSK, SLPPIN_DN_FUN);
+ break;
+ default:
+ break;
+ }
}
}

@@ -565,8 +568,6 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
cells = rk805s;
nr_cells = ARRAY_SIZE(rk805s);
- rk808->pm_pwroff_fn = rk805_device_shutdown;
- rk808->pm_pwroff_prep_fn = rk805_device_shutdown_prepare;
break;
case RK808_ID:
rk808->regmap_cfg = &rk808_regmap_config;
--
2.24.0
\
 
 \ /
  Last update: 2019-12-06 19:47    [W:0.135 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site