lkml.org 
[lkml]   [2019]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
On Thu, 5 Dec 2019 09:21:29 -0600
Rob Herring <robh@kernel.org> wrote:

> On Sat, Nov 23, 2019 at 08:35:10PM -0300, Rodrigo Carvalho wrote:
> > This patch add device tree binding documentation for ADIS16240.
> >
> > Signed-off-by: Rodrigo Ribeiro Carvalho <rodrigorsdc@gmail.com>
>
> checkpatch.pl complains about a mismatch between the author and S-o-b.
The open question on patch 1 is resolved, so respin with the points Rob pointed
out her resolved and I'll pick up v6.

Thanks,

Jonathan

>
> > ---
> > V5:
> > - None
> >
> > .../bindings/iio/accel/adi,adis16240.yaml | 49 +++++++++++++++++++
> > 1 file changed, 49 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> > new file mode 100644
> > index 000000000000..8e902f7c49e6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> > @@ -0,0 +1,49 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> Dual license new bindings please: (GPL-2.0-only OR BSD-2-Clause)
>
> With that,
>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ADIS16240 Programmable Impact Sensor and Recorder driver
> > +
> > +maintainers:
> > + - Alexandru Ardelean <alexandru.ardelean@analog.com>
> > +
> > +description: |
> > + ADIS16240 Programmable Impact Sensor and Recorder driver that supports
> > + SPI interface.
> > + https://www.analog.com/en/products/adis16240.html
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - adi,adis16240
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + spi0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + /* Example for a SPI device node */
> > + accelerometer@0 {
> > + compatible = "adi,adis16240";
> > + reg = <0>;
> > + spi-max-frequency = <2500000>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > + };
> > --
> > 2.24.0
> >

\
 
 \ /
  Last update: 2019-12-06 18:10    [W:0.037 / U:2.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site