lkml.org 
[lkml]   [2019]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] net: ethernet: ti: cpsw: fix extra rx interrupt
Date
Now RX interrupt is triggered twice every time, because in
cpsw_rx_interrupt() it is asked first and then disabled. So there will be
pending interrupt always, when RX interrupt is enabled again in NAPI
handler.

Fix it by first disabling IRQ and then do ask.

Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
Hi

It requires manual backporting if selected for stable.
I can prepare separate patch for 5.4 if needed.

drivers/net/ethernet/ti/cpsw_priv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/cpsw_priv.c b/drivers/net/ethernet/ti/cpsw_priv.c
index b833cc1d188c..707d5eb480ce 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.c
+++ b/drivers/net/ethernet/ti/cpsw_priv.c
@@ -100,8 +100,8 @@ irqreturn_t cpsw_rx_interrupt(int irq, void *dev_id)
{
struct cpsw_common *cpsw = dev_id;

- cpdma_ctlr_eoi(cpsw->dma, CPDMA_EOI_RX);
writel(0, &cpsw->wr_regs->rx_en);
+ cpdma_ctlr_eoi(cpsw->dma, CPDMA_EOI_RX);

if (cpsw->quirk_irq) {
disable_irq_nosync(cpsw->irqs_table[0]);
--
2.17.1
\
 
 \ /
  Last update: 2019-12-06 13:29    [W:0.025 / U:2.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site