lkml.org 
[lkml]   [2019]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 05/14] arm64: dts: add gce node for mt6779
From
Date
On Wed, 2019-11-27 at 09:58 +0800, Dennis YC Hsieh wrote:
> add gce device node for mt6779
>
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>

Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt6779.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> index daa25b75788f..10d59385f4a1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/clock/mt6779-clk.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/gce/mt6779-gce.h>
>
> / {
> compatible = "mediatek,mt6779";
> @@ -159,6 +160,15 @@
> #clock-cells = <1>;
> };
>
> + gce: mailbox@10228000 {
> + compatible = "mediatek,mt6779-gce";
> + reg = <0 0x10228000 0 0x4000>;
> + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
> + #mbox-cells = <3>;
> + clocks = <&infracfg_ao CLK_INFRA_GCE>;
> + clock-names = "gce";
> + };
> +
> uart0: serial@11002000 {
> compatible = "mediatek,mt6779-uart",
> "mediatek,mt6577-uart";

\
 
 \ /
  Last update: 2019-12-06 05:06    [W:0.156 / U:2.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site