lkml.org 
[lkml]   [2019]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net] net: dsa: fix flow dissection on Tx path
From
Date


On 12/5/2019 2:02 AM, Alexander Lobakin wrote:
> Commit 43e665287f93 ("net-next: dsa: fix flow dissection") added an
> ability to override protocol and network offset during flow dissection
> for DSA-enabled devices (i.e. controllers shipped as switch CPU ports)
> in order to fix skb hashing for RPS on Rx path.
>
> However, skb_hash() and added part of code can be invoked not only on
> Rx, but also on Tx path if we have a multi-queued device and:
> - kernel is running on UP system or
> - XPS is not configured.
>
> The call stack in this two cases will be like: dev_queue_xmit() ->
> __dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() ->
> skb_tx_hash() -> skb_get_hash().
>
> The problem is that skbs queued for Tx have both network offset and
> correct protocol already set up even after inserting a CPU tag by DSA
> tagger, so calling tag_ops->flow_dissect() on this path actually only
> breaks flow dissection and hashing.
>
> This can be observed by adding debug prints just before and right after
> tag_ops->flow_dissect() call to the related block of code:
>
> Before the patch:
>
> Rx path (RPS):
>
> [ 19.240001] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
> [ 19.244271] tag_ops->flow_dissect()
> [ 19.247811] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */
>
> [ 19.215435] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
> [ 19.219746] tag_ops->flow_dissect()
> [ 19.223241] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */
>
> [ 18.654057] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
> [ 18.658332] tag_ops->flow_dissect()
> [ 18.661826] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */
>
> Tx path (UP system):
>
> [ 18.759560] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */
> [ 18.763933] tag_ops->flow_dissect()
> [ 18.767485] Tx: proto: 0x920b, nhoff: 34 /* junk */
>
> [ 22.800020] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */
> [ 22.804392] tag_ops->flow_dissect()
> [ 22.807921] Tx: proto: 0x920b, nhoff: 34 /* junk */
>
> [ 16.898342] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */
> [ 16.902705] tag_ops->flow_dissect()
> [ 16.906227] Tx: proto: 0x920b, nhoff: 34 /* junk */
>
> After:
>
> Rx path (RPS):
>
> [ 16.520993] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
> [ 16.525260] tag_ops->flow_dissect()
> [ 16.528808] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */
>
> [ 15.484807] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
> [ 15.490417] tag_ops->flow_dissect()
> [ 15.495223] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */
>
> [ 17.134621] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
> [ 17.138895] tag_ops->flow_dissect()
> [ 17.142388] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */
>
> Tx path (UP system):
>
> [ 15.499558] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */
>
> [ 20.664689] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */
>
> [ 18.565782] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */
>
> In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)'
> to prevent code from calling tag_ops->flow_dissect() on Tx.
> I also decided to initialize 'offset' variable so tagger callbacks can
> now safely leave it untouched without provoking a chaos.
>
> Fixes: 43e665287f93 ("net-next: dsa: fix flow dissection")
> Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian

\
 
 \ /
  Last update: 2019-12-06 04:29    [W:0.085 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site