lkml.org 
[lkml]   [2019]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/5] USB support on stm32mp157 boards
On 2019-11-21 17:11, Amelie Delaunay wrote:
> This patchset adds support for USB (Host and OTG) on stm32mp157a-dk1.
> USB OTG HS is forced in Peripheral mode.
> This patchset also fixes USB on stm32mp157c-ev1: USB PHYS supplies were missing
> (CONFIG_REGULATOR_STM32_PWR) and usbotg_hs node requires phy-names property to
> get the phy.
>
> Amelie Delaunay (5):
> ARM: multi_v7_defconfig: enable STM32 PWR regulator
> ARM: dts: stm32: enable USBPHYC on stm32mp157a-dk1
> ARM: dts: stm32: enable USB Host (USBH) EHCI controller on
> stm32mp157a-dk1
> ARM: dts: stm32: enable USB OTG HS on stm32mp157a-dk1
> ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1
>
> arch/arm/boot/dts/stm32mp157a-dk1.dts | 28 +++++++++++++++++++++++++++
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
> arch/arm/configs/multi_v7_defconfig | 1 +
> 3 files changed, 30 insertions(+)

I tested the series on a stm32mp157c-dk2.

Tested-by: Aurelien Jarno <aurelien@aurel32.net>

--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurelien@aurel32.net http://www.aurel32.net

\
 
 \ /
  Last update: 2019-12-05 23:30    [W:0.024 / U:5.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site