lkml.org 
[lkml]   [2019]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: at91: sama5d27_som1_ek: add i2c filters properties
Date
From: Eugen Hristev <eugen.hristev@microchip.com>

Add properties for i2c filters for i2c0 and i2c1 on sama5d27_som1_ek.
Noise is affecting communication on i2c for example when connecting i2c
camera sensors.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---

Changes in v2:
- properties were at the wrong node for i2c0, need to be at the i2c node
not the parent flexcom

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index fca5716..b0853bf 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -131,6 +131,9 @@
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <0>, <0>;
dma-names = "tx", "rx";
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
@@ -246,6 +249,9 @@

i2c1: i2c@fc028000 {
dmas = <0>, <0>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
status = "okay";
--
2.7.4
\
 
 \ /
  Last update: 2019-12-05 08:44    [W:0.033 / U:8.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site