[lkml]   [2019]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v8 0/5] power: supply: MAX17040: Add IRQ for low level and alert SOC changes
This series add IRQ handler for low level SOC alert, define a devicetree
binding attribute to configure the alert level threshold and check for
changes in SOC and power supply status for send uevents.

Max17043/17044 have a pin for alert host about low level state of charge and
this alert can be configured in a threshold from 1% up to 32% of SOC.

Thanks Krzysztof Kozlowski, Lee Jones, Rob Herring and Sebastian Reichel for
your time reviewing it.

Changes since v7:
(Suggested by Sebastian Reichel)
- Fix unrelated change
- Use device_property_read_u32() and simplify the code
- Check the irq and of_device_is_compatible in the first patch

Changes since v6:
(Suggested by Lee Jones)
- Use relative paths in documentation

Matheus Castello (5):
power: supply: max17040: Add IRQ handler for low SOC alert
dt-bindings: power: supply: Max17040: Add DT bindings for max17040
fuel gauge
devicetree: mfd: max14577: Add reference to max14040_battery.txt
power: supply: max17040: Config alert SOC low level threshold from FDT
power: supply: max17040: Send uevent in SOC and status change

.../devicetree/bindings/mfd/max14577.txt | 2 +
.../power/supply/max17040_battery.txt | 33 +++++
drivers/power/supply/max17040_battery.c | 130 +++++++++++++++++-
3 files changed, 161 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/supply/max17040_battery.txt


 \ /
  Last update: 2019-12-05 17:08    [W:0.130 / U:4.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site