lkml.org 
[lkml]   [2019]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] video: fbdev: added driver for sharp memory lcd displays
Date
The supported displays are ls027b7dh01 (tested), ls044q7dh01,
ls013b7dh05, ls013b7dh03

Signed-off-by: Rodrigo Alencar <455.rodrigo.alencar@gmail.com>
---
.../devicetree/bindings/display/smemlcdfb.txt | 46 ++
drivers/video/fbdev/Kconfig | 14 +
drivers/video/fbdev/Makefile | 1 +
drivers/video/fbdev/smemlcdfb.c | 503 ++++++++++++++++++
4 files changed, 564 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/smemlcdfb.txt
create mode 100644 drivers/video/fbdev/smemlcdfb.c

diff --git a/Documentation/devicetree/bindings/display/smemlcdfb.txt b/Documentation/devicetree/bindings/display/smemlcdfb.txt
new file mode 100644
index 000000000000..e33025dd3374
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/smemlcdfb.txt
@@ -0,0 +1,46 @@
+Sharp Memory LCD Linux Framebuffer Driver
+
+Required properties:
+ - compatible: It should be "sharp,<model-no>". The supported displays are
+ ls027b7dh01, ls044q7dh01, ls013b7dh05, ls013b7dh03. Maybe other
+ monochromatic models can be supported with the current code.
+ - reg: SPI chip select number for the device.
+ - spi-max-frequency: Max SPI frequency to use. One must verify the datasheet.
+ - spi-cs-high: Sharp Memory LCD needs chipselect high.
+
+Optional properties:
+ - sharp,frames-per-sec: It should contain the desired frames per second.
+ It does not represent the actual frame rate. Default: 10
+ - sharp,extmode-high: External COM Input signal is expected in EXTCOMIN port.
+ This is recommended to reduce CPU and SPI Load.
+ - pwm: If property "sharp,extmode-high" is specified, this is recommended.
+ It should contain the pwm to use, according to
+ Documentation/devicetree/bindings/pwm/pwm.txt
+ Verify the display datasheet for the EXTCOMIN signal period
+ - disp-gpios: The GPIO used to enable the display, if available. See
+ Documentation/devicetree/bindings/gpio/gpio.txt for details.
+
+Examples:
+
+ls027b7dh01: smemlcd@0 {
+ compatible = "sharp,ls027b7dh01";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cs-high;
+ disp-gpios = <&gpio0 7>;
+ disp-active-high;
+ sharp,extmode-high;
+ pwms = <&pwm 0 100000000>;
+};
+
+ls013b7dh05: smemlcd@3 {
+ compatible = "sharp,ls013b7dh05";
+ reg = <3>;
+ spi-max-frequency = <1000000>;
+ spi-cs-high;
+ disp-gpios = <&gpio0 13>;
+ disp-active-high;
+ sharp,extmode-high;
+ pwms = <&pwm 0 50000000>;
+ sharp,frames-per-sec = <20>;
+};
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index aa9541bf964b..626a572edc4e 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2264,6 +2264,20 @@ config FB_SM712
called sm712fb. If you want to compile it as a module, say M
here and read <file:Documentation/kbuild/modules.rst>.

+config FB_SMEMLCD
+ tristate "Sharp Memory LCD framebuffer support"
+ depends on FB && SPI
+ depends on OF
+ depends on GPIOLIB || COMPILE_TEST
+ select FB_SYS_FOPS
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_DEFERRED_IO
+ select PWM
+ help
+ This driver implements support for the Sharp Memory LCD
+
source "drivers/video/fbdev/omap/Kconfig"
source "drivers/video/fbdev/omap2/Kconfig"
source "drivers/video/fbdev/mmp/Kconfig"
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index aa6352798cf4..3c0e060e9069 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -120,6 +120,7 @@ obj-$(CONFIG_FB_PUV3_UNIGFX) += fb-puv3.o
obj-$(CONFIG_FB_HYPERV) += hyperv_fb.o
obj-$(CONFIG_FB_OPENCORES) += ocfb.o
obj-$(CONFIG_FB_SM712) += sm712fb.o
+obj-$(CONFIG_FB_SMEMLCD) += smemlcdfb.o

# Platform or fallback drivers go here
obj-$(CONFIG_FB_UVESA) += uvesafb.o
diff --git a/drivers/video/fbdev/smemlcdfb.c b/drivers/video/fbdev/smemlcdfb.c
new file mode 100644
index 000000000000..635f8e27d632
--- /dev/null
+++ b/drivers/video/fbdev/smemlcdfb.c
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 IMBEL http://www.imbel.gov.br
+ * Rodrigo Alencar <alencar.fmce@imbel.gov.br>
+ */
+
+#include <linux/fb.h>
+#include <linux/bitrev.h>
+#include <linux/gpio/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/pwm.h>
+
+#define SMEMLCD_DATA_UPDATE 0x80
+#define SMEMLCD_FRAME_INVERSION 0x40
+#define SMEMLCD_ALL_CLEAR 0x20
+#define SMEMLCD_DUMMY_DATA 0x00
+
+struct smemlcd_info {
+ u32 width;
+ u32 height;
+};
+
+struct smemlcd_par {
+ struct spi_device *spi;
+ struct fb_info *info;
+ struct pwm_device *extcomin_pwm;
+ struct gpio_desc *disp;
+ struct delayed_work d_work;
+ struct mutex update_lock;
+
+ u8 *spi_buf;
+
+ bool extmode;
+ u32 spi_width;
+ u32 vmem_width;
+
+ u8 vcom;
+ u32 start;
+ u32 height;
+};
+
+static struct fb_fix_screeninfo smemlcd_fix = {
+ .id = "Sharp Memory LCD",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_MONO10,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo smemlcd_var = {
+ .bits_per_pixel = 1,
+ .red = {0, 1, 0},
+ .green = {0, 1, 0},
+ .blue = {0, 1, 0},
+ .transp = {0, 0, 0},
+ .left_margin = 0,
+ .right_margin = 0,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static void smemlcd_update(struct smemlcd_par *par)
+{
+ struct spi_device *spi = par->spi;
+ u8 *vmem = par->info->screen_base;
+ u8 *buf_ptr = par->spi_buf;
+ int ret;
+ u32 i,j;
+
+ if (par->start + par->height > par->info->var.yres) {
+ par->start = 0;
+ par->height = 0;
+ }
+ /* go to start line */
+ vmem += par->start * par->vmem_width;
+ /* update vcom */
+ par->vcom ^= SMEMLCD_FRAME_INVERSION;
+ /* mode selection */
+ *(buf_ptr++) = (par->height)? (SMEMLCD_DATA_UPDATE | par->vcom) : par->vcom;
+
+ /* not all SPI masters have LSB-first mode, bitrev8 is used */
+ for (i = par->start + 1; i < par->start + par->height + 1; i++) {
+ /* gate line address */
+ *(buf_ptr++) = bitrev8(i);
+ /* data writing */
+ for (j = 0; j < par->spi_width; j++)
+ *(buf_ptr++) = bitrev8(*(vmem++));
+ /* dummy data */
+ *(buf_ptr++) = SMEMLCD_DUMMY_DATA;
+ /* video memory alignment */
+ for (; j < par->vmem_width; j++)
+ vmem++;
+ }
+ /* dummy data */
+ *(buf_ptr++) = SMEMLCD_DUMMY_DATA;
+
+ ret = spi_write(spi, &(par->spi_buf[0]), par->height * (par->spi_width + 2) + 2);
+ if (ret < 0)
+ dev_err(&spi->dev, "Couldn't send SPI command.\n");
+
+ par->start = U32_MAX;
+ par->height = 0;
+}
+
+static void smemlcd_frame(struct smemlcd_par *par, u32 req_start, u32 req_height)
+{
+ u32 end = par->start + par->height;
+ u32 req_end = req_start + req_height;
+ if (req_end > par->info->var.yres)
+ req_end = par->info->var.yres;
+ if (par->start > req_start)
+ par->start = req_start;
+ if (end < req_end || end > par->info->var.yres)
+ end = req_end;
+ par->height = end - par->start;
+}
+
+static void smemlcd_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ struct smemlcd_par *par = info->par;
+ sys_fillrect(info, rect);
+
+ mutex_lock(&par->update_lock);
+ smemlcd_frame(par, rect->dy, rect->height);
+ if(par->extmode)
+ smemlcd_update(par);
+ mutex_unlock(&par->update_lock);
+}
+
+static void smemlcd_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ struct smemlcd_par *par = info->par;
+ sys_imageblit(info, image);
+
+ mutex_lock(&par->update_lock);
+ smemlcd_frame(par, image->dy, image->height);
+ if(par->extmode)
+ smemlcd_update(par);
+ mutex_unlock(&par->update_lock);
+}
+
+static void smemlcd_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+ struct smemlcd_par *par = info->par;
+ sys_copyarea(info, area);
+
+ mutex_lock(&par->update_lock);
+ smemlcd_frame(par, area->dy, area->height);
+ if(par->extmode)
+ smemlcd_update(par);
+ mutex_unlock(&par->update_lock);
+}
+
+static ssize_t smemlcd_write(struct fb_info *info, const char __user * buf, size_t count, loff_t * ppos)
+{
+ ssize_t ret;
+ struct smemlcd_par *par = info->par;
+ u32 req_start, req_height;
+ u32 offset = (u32) * ppos;
+
+ ret = fb_sys_write(info, buf, count, ppos);
+ if (ret > 0) {
+ mutex_lock(&par->update_lock);
+ req_start = max((int)(offset / par->vmem_width), 0);
+ req_height = ret / par->vmem_width + 1;
+ smemlcd_frame(par, req_start, req_height);
+ if(par->extmode)
+ smemlcd_update(par);
+ mutex_unlock(&par->update_lock);
+ }
+
+ return ret;
+}
+
+static int smemlcd_blank(int blank_mode, struct fb_info *info)
+{
+ struct smemlcd_par *par = info->par;
+
+ if (par->disp) {
+ if (blank_mode != FB_BLANK_UNBLANK)
+ gpiod_set_value_cansleep(par->disp, 0);
+ else
+ gpiod_set_value_cansleep(par->disp, 1);
+ }
+
+ return 0;
+}
+
+static void smemlcd_deferred_io(struct fb_info *info, struct list_head *pagelist)
+{
+ struct smemlcd_par *par = info->par;
+
+ mutex_lock(&par->update_lock);
+
+ if (!list_empty(pagelist)) {
+ struct page *cur;
+ u32 req_start;
+ u32 req_height = (PAGE_SIZE / par->vmem_width) + 1;
+
+ list_for_each_entry(cur, pagelist, lru) {
+ req_start = (cur->index << PAGE_SHIFT) / par->vmem_width;
+ smemlcd_frame(par, req_start, req_height);
+ }
+ }
+
+ if(par->extmode)
+ smemlcd_update(par);
+ mutex_unlock(&par->update_lock);
+}
+
+static void smemlcd_update_work(struct work_struct *work)
+{
+ struct smemlcd_par *par = container_of(work, struct smemlcd_par, d_work.work);
+ struct fb_info *info = par->info;
+
+ mutex_lock(&par->update_lock);
+ smemlcd_update(par);
+ mutex_unlock(&par->update_lock);
+
+ if (!par->extmode)
+ schedule_delayed_work(&par->d_work, info->fbdefio->delay);
+}
+
+static struct fb_ops smemlcd_ops = {
+ .owner = THIS_MODULE,
+ .fb_read = fb_sys_read,
+ .fb_write = smemlcd_write,
+ .fb_fillrect = smemlcd_fillrect,
+ .fb_copyarea = smemlcd_copyarea,
+ .fb_imageblit = smemlcd_imageblit,
+ .fb_blank = smemlcd_blank,
+};
+
+static struct smemlcd_info ls027b7dh01_info = {
+ .width = 400,
+ .height = 240,
+};
+
+static struct smemlcd_info ls044q7dh01_info = {
+ .width = 320,
+ .height = 240,
+};
+
+static struct smemlcd_info ls013b7dh05_info = {
+ .width = 144,
+ .height = 168,
+};
+
+static struct smemlcd_info ls013b7dh03_info = {
+ .width = 128,
+ .height = 128,
+};
+
+static const struct of_device_id smemlcd_of_match[] = {
+ {
+ .compatible = "sharp,ls027b7dh01",
+ .data = (void *)&ls027b7dh01_info,
+ },
+ {
+ .compatible = "sharp,ls044q7dh01",
+ .data = (void *)&ls044q7dh01_info,
+ },
+ {
+ .compatible = "sharp,ls013b7dh05",
+ .data = (void *)&ls013b7dh05_info,
+ },
+ {
+ .compatible = "sharp,ls013b7dh03",
+ .data = (void *)&ls013b7dh03_info,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, smemlcd_of_match);
+
+static int smemlcd_probe(struct spi_device *spi)
+{
+ struct fb_info *info;
+ struct smemlcd_par *par;
+ const struct smemlcd_info *devinfo;
+ struct fb_deferred_io *smemlcd_defio;
+ struct device_node *node = spi->dev.of_node;
+ struct pwm_state state;
+ u32 vmem_size, fps;
+ u8 *vmem;
+ u8 *buf_ptr;
+ int ret;
+
+ info = framebuffer_alloc(sizeof(struct smemlcd_par), &spi->dev);
+ if (!info) {
+ dev_err(&spi->dev, "Failed to allocate framebuffer.\n");
+ return -ENOMEM;
+ }
+
+ par = info->par;
+ par->info = info;
+ par->spi = spi;
+
+ devinfo = of_device_get_match_data(&spi->dev);
+
+ par->disp = devm_gpiod_get_optional(&spi->dev, "disp", GPIOD_OUT_LOW);
+ if (IS_ERR(par->disp)) {
+ ret = PTR_ERR(par->disp);
+ dev_err(&spi->dev, "Failed to get DISP gpio: %d\n", ret);
+ goto free_fb;
+ }
+
+ mutex_init(&par->update_lock);
+ INIT_DELAYED_WORK(&par->d_work, smemlcd_update_work);
+ par->spi_width = devinfo->width / 8;
+ par->vmem_width = ((devinfo->width + 31) & ~31) >> 3;
+ par->vcom = 0;
+ par->start = 0;
+ par->height = 0;
+
+ par->spi_buf = kzalloc(devinfo->height * (par->spi_width + 2) + 2, GFP_KERNEL);
+ if (!par->spi_buf) {
+ ret = -ENOMEM;
+ dev_err(&spi->dev, "Failed to allocate data for spi transfers.\n");
+ goto free_fb;
+ }
+
+ vmem_size = par->vmem_width * devinfo->height;
+
+ vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(vmem_size));
+ if (!vmem) {
+ ret = -ENOMEM;
+ dev_err(&spi->dev, "Failed to allocate video memory.\n");
+ goto free_spi_buf;
+ }
+
+ par->extmode = of_property_read_bool(node, "sharp,extmode-high");
+
+ if (of_property_read_u32(node, "sharp,frames-per-sec", &fps))
+ fps = 10;
+
+ smemlcd_defio = devm_kzalloc(&spi->dev, sizeof(struct fb_deferred_io), GFP_KERNEL);
+ if (!smemlcd_defio) {
+ dev_err(&spi->dev, "Couldn't allocate deferred io.\n");
+ ret = -ENOMEM;
+ goto free_vmem;
+ }
+
+ smemlcd_defio->delay = HZ / fps;
+ smemlcd_defio->deferred_io = &smemlcd_deferred_io;
+
+ info->var = smemlcd_var;
+ info->var.xres = devinfo->width;
+ info->var.xres_virtual = devinfo->width;
+ info->var.yres = devinfo->height;
+ info->var.yres_virtual = devinfo->height;
+
+ info->screen_base = (u8 __force __iomem *) vmem;
+ info->screen_size = vmem_size;
+
+ info->fbops = &smemlcd_ops;
+ info->fix = smemlcd_fix;
+ info->fix.line_length = par->vmem_width;
+ info->fix.smem_start = __pa(vmem);
+ info->fix.smem_len = vmem_size;
+
+ info->fbdefio = smemlcd_defio;
+
+ fb_deferred_io_init(info);
+
+ spi_set_drvdata(spi, par);
+
+ if (par->extmode) {
+ par->extcomin_pwm = pwm_get(&spi->dev, NULL);
+ if (IS_ERR(par->extcomin_pwm)) {
+ ret = PTR_ERR(par->extcomin_pwm);
+ dev_warn(&spi->dev, "Failed to get EXTCOMIN pwm: %d\n", ret);
+ par->extcomin_pwm = NULL;
+ } else {
+
+ pwm_init_state(par->extcomin_pwm, &state);
+
+ if (!state.period)
+ state.period = NSEC_PER_SEC/fps;
+
+ /* The duty cycle is not really important */
+ state.enabled = true;
+ state.duty_cycle = state.period/2;
+
+ ret = pwm_apply_state(par->extcomin_pwm, &state);
+ if (ret)
+ dev_warn(&spi->dev, "failed to apply EXTCOMIN pwm state: %d\n", ret);
+ }
+ } else {
+ par->extcomin_pwm = NULL;
+ }
+
+ if (par->disp)
+ gpiod_set_value_cansleep(par->disp, 1);
+
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(&spi->dev, "Failed to register framebuffer.\n");
+ goto disable_hw;
+ }
+
+ /* spi test by clearing the display */
+ par->spi_buf[0] = SMEMLCD_ALL_CLEAR;
+ par->spi_buf[1] = SMEMLCD_DUMMY_DATA;
+ ret = spi_write(spi, &(par->spi_buf[0]), 2);
+ if (ret < 0){
+ dev_err(&spi->dev, "Couldn't send SPI command.\n");
+ goto disable_hw;
+ }
+
+ dev_info(&spi->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
+
+ if (!par->extmode)
+ schedule_delayed_work(&par->d_work, smemlcd_defio->delay);
+
+ return 0;
+
+disable_hw:
+ if (par->disp)
+ gpiod_set_value_cansleep(par->disp, 0);
+ if (par->extcomin_pwm) {
+ state.enabled = false;
+ state.duty_cycle = 0;
+ pwm_apply_state(par->extcomin_pwm, &state);
+ pwm_put(par->extcomin_pwm);
+ }
+ kfree(smemlcd_defio);
+free_vmem:
+ kfree((void *)vmem);
+free_spi_buf:
+ kfree(par->spi_buf);
+free_fb:
+ cancel_delayed_work_sync(&par->d_work);
+ mutex_destroy(&par->update_lock);
+ framebuffer_release(info);
+
+ return ret;
+}
+
+static int smemlcd_remove(struct spi_device *spi)
+{
+ struct smemlcd_par *par = dev_get_drvdata(&spi->dev);
+ struct fb_info *info = par->info;
+ struct pwm_state state;
+
+ par->extmode = true;
+ cancel_delayed_work_sync(&par->d_work);
+
+ fb_deferred_io_cleanup(info);
+
+ unregister_framebuffer(info);
+
+ if (par->disp)
+ gpiod_set_value_cansleep(par->disp, 0);
+
+ if (par->extcomin_pwm) {
+ pwm_get_state(par->extcomin_pwm, &state);
+ state.enabled = false;
+ state.duty_cycle = 0;
+ pwm_apply_state(par->extcomin_pwm, &state);
+ pwm_put(par->extcomin_pwm);
+ }
+
+ fb_deferred_io_cleanup(info);
+ __free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len));
+
+ kfree(par->spi_buf);
+
+ mutex_destroy(&par->update_lock);
+
+ framebuffer_release(info);
+
+ return 0;
+}
+
+static const struct spi_device_id smemlcd_spi_id[] = {
+ {"ls027b7dh01", 0},
+ {"ls044q7dh01", 0},
+ {"ls013b7dh05", 0},
+ {"ls013b7dh03", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, smemlcd_spi_id);
+
+static struct spi_driver smemlcd_driver = {
+ .probe = smemlcd_probe,
+ .remove = smemlcd_remove,
+ .id_table = smemlcd_spi_id,
+ .driver = {
+ .name = "smemlcdfb",
+ .of_match_table = smemlcd_of_match,
+ },
+};
+module_spi_driver(smemlcd_driver);
+
+MODULE_AUTHOR("Rodrigo Alencar <455.rodrigo.alencar@gmail.com>");
+MODULE_DESCRIPTION("Sharp Memory LCD Linux Framebuffer Driver");
+MODULE_LICENSE("GPL");
--
2.23.0.rc1
\
 
 \ /
  Last update: 2019-12-05 15:00    [W:0.044 / U:1.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site