lkml.org 
[lkml]   [2019]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 03/28] drm/bridge/analogix: Use drm_bridge_init()
On Wed, Dec 04, 2019 at 11:48:04AM +0000, Mihail Atanassov wrote:
> No functional change.
>
> The setting of bridge->of_node by drm_bridge_init() in
> analogix_dp_core.c is safe, since ->of_node isn't used directly and the
> bridge isn't published with drm_bridge_add().

Still, it's not the right device, is it ? And if we later extend the
usage of dev in drm_bridge_init() it could cause issues. I think you
should use the right device pointer.

>
> Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
> ---
> drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 5 ++---
> drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c | 8 ++------
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 5 ++---
> 3 files changed, 6 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> index b4f3a923a52a..130d5c3a07ef 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> @@ -696,8 +696,6 @@ static int anx6345_i2c_probe(struct i2c_client *client,
>
> mutex_init(&anx6345->lock);
>
> - anx6345->bridge.of_node = client->dev.of_node;
> -
> anx6345->client = client;
> i2c_set_clientdata(client, anx6345);
>
> @@ -760,7 +758,8 @@ static int anx6345_i2c_probe(struct i2c_client *client,
> /* Look for supported chip ID */
> anx6345_poweron(anx6345);
> if (anx6345_get_chip_id(anx6345)) {
> - anx6345->bridge.funcs = &anx6345_bridge_funcs;
> + drm_bridge_init(&anx6345->bridge, &client->dev,
> + &anx6345_bridge_funcs, NULL, NULL);
> drm_bridge_add(&anx6345->bridge);
>
> return 0;
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
> index 41867be03751..e37892cdc9cf 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
> @@ -1214,10 +1214,6 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
>
> mutex_init(&anx78xx->lock);
>
> -#if IS_ENABLED(CONFIG_OF)
> - anx78xx->bridge.of_node = client->dev.of_node;
> -#endif
> -
> anx78xx->client = client;
> i2c_set_clientdata(client, anx78xx);
>
> @@ -1321,8 +1317,8 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
> goto err_poweroff;
> }
>
> - anx78xx->bridge.funcs = &anx78xx_bridge_funcs;
> -
> + drm_bridge_init(&anx78xx->bridge, &client->dev, &anx78xx_bridge_funcs,
> + NULL, NULL);
> drm_bridge_add(&anx78xx->bridge);
>
> /* If cable is pulled out, just poweroff and wait for HPD event */
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index bb411fe52ae8..4042ba9a98d8 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -1585,9 +1585,8 @@ static int analogix_dp_create_bridge(struct drm_device *drm_dev,
>
> dp->bridge = bridge;
>
> - bridge->driver_private = dp;
> - bridge->funcs = &analogix_dp_bridge_funcs;
> -
> + drm_bridge_init(bridge, drm_dev->dev, &analogix_dp_bridge_funcs,
> + NULL, dp);
> ret = drm_bridge_attach(dp->encoder, bridge, NULL);
> if (ret) {
> DRM_ERROR("failed to attach drm bridge\n");

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2019-12-05 14:31    [W:0.032 / U:3.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site