lkml.org 
[lkml]   [2019]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: stm32: remove "@" and "_" from stm32f4 pinmux groups
Date
Replace all "@" and "_" by "-" in pinmux groups for stm32f4 family.
This avoid errors when using yaml to check the bindings.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
changes in version 2:
- replace @ and _ by -

arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 35202896c093..392fa143ce07 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -163,7 +163,7 @@
st,bank-name = "GPIOK";
};

- usart1_pins_a: usart1@0 {
+ usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
@@ -176,7 +176,7 @@
};
};

- usart3_pins_a: usart3@0 {
+ usart3_pins_a: usart3-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
bias-disable;
@@ -189,7 +189,7 @@
};
};

- usbotg_fs_pins_a: usbotg_fs@0 {
+ usbotg_fs_pins_a: usbotg-fs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
<STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -200,7 +200,7 @@
};
};

- usbotg_fs_pins_b: usbotg_fs@1 {
+ usbotg_fs_pins_b: usbotg-fs-1 {
pins {
pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
<STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
@@ -211,7 +211,7 @@
};
};

- usbotg_hs_pins_a: usbotg_hs@0 {
+ usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
<STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -231,7 +231,7 @@
};
};

- ethernet_mii: mii@0 {
+ ethernet_mii: mii-0 {
pins {
pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
<STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
@@ -251,13 +251,13 @@
};
};

- adc3_in8_pin: adc@200 {
+ adc3_in8_pin: adc-200 {
pins {
pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
};
};

- pwm1_pins: pwm@1 {
+ pwm1_pins: pwm-1 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
<STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
@@ -265,14 +265,14 @@
};
};

- pwm3_pins: pwm@3 {
+ pwm3_pins: pwm-3 {
pins {
pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
<STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
};
};

- i2c1_pins: i2c1@0 {
+ i2c1_pins: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
<STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
@@ -282,7 +282,7 @@
};
};

- ltdc_pins: ltdc@0 {
+ ltdc_pins: ltdc-0 {
pins {
pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
<STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
@@ -316,7 +316,7 @@
};
};

- dcmi_pins: dcmi@0 {
+ dcmi_pins: dcmi-0 {
pins {
pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
<STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
@@ -339,7 +339,7 @@
};
};

- sdio_pins: sdio_pins@0 {
+ sdio_pins: sdio-pins-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
@@ -352,7 +352,7 @@
};
};

- sdio_pins_od: sdio_pins_od@0 {
+ sdio_pins_od: sdio-pins-od-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
--
2.15.0
\
 
 \ /
  Last update: 2019-12-04 16:55    [W:0.048 / U:7.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site