lkml.org 
[lkml]   [2019]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 02/11] gpiolib: have a single place of calling set_config()
On Wed, Dec 4, 2019 at 6:04 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Instead of calling the gpiochip's set_config() callback directly and
> checking its existence every time - just add a new routine that performs
> this check internally. Call it in gpio_set_config() and
> gpiod_set_transitory(). Also call it in gpiod_set_debounce() and drop
> the check for chip->set() as it's irrelevant to this config option.
>

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> drivers/gpio/gpiolib.c | 21 ++++++++++++---------
> 1 file changed, 12 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index a31797fe78fa..72211407469f 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -3042,6 +3042,15 @@ EXPORT_SYMBOL_GPL(gpiochip_free_own_desc);
> * rely on gpio_request() having been called beforehand.
> */
>
> +static int gpio_do_set_config(struct gpio_chip *gc, unsigned int offset,
> + enum pin_config_param mode)
> +{
> + if (!gc->set_config)
> + return -ENOTSUPP;
> +
> + return gc->set_config(gc, offset, mode);
> +}
> +
> static int gpio_set_config(struct gpio_chip *gc, unsigned int offset,
> enum pin_config_param mode)
> {
> @@ -3060,7 +3069,7 @@ static int gpio_set_config(struct gpio_chip *gc, unsigned int offset,
> }
>
> config = PIN_CONF_PACKED(mode, arg);
> - return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP;
> + return gpio_do_set_config(gc, offset, mode);
> }
>
> static int gpio_set_bias(struct gpio_chip *chip, struct gpio_desc *desc)
> @@ -3294,15 +3303,9 @@ int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
>
> VALIDATE_DESC(desc);
> chip = desc->gdev->chip;
> - if (!chip->set || !chip->set_config) {
> - gpiod_dbg(desc,
> - "%s: missing set() or set_config() operations\n",
> - __func__);
> - return -ENOTSUPP;
> - }
>
> config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce);
> - return chip->set_config(chip, gpio_chip_hwgpio(desc), config);
> + return gpio_do_set_config(chip, gpio_chip_hwgpio(desc), config);
> }
> EXPORT_SYMBOL_GPL(gpiod_set_debounce);
>
> @@ -3339,7 +3342,7 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
> packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
> !transitory);
> gpio = gpio_chip_hwgpio(desc);
> - rc = chip->set_config(chip, gpio, packed);
> + rc = gpio_do_set_config(chip, gpio, packed);
> if (rc == -ENOTSUPP) {
> dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
> gpio);
> --
> 2.23.0
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2019-12-04 23:19    [W:0.131 / U:2.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site