lkml.org 
[lkml]   [2019]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_ops
Date
The .set_ramp_delay should be for bd70528_buck_ops only.
Setting .set_ramp_delay for for bd70528_ldo_ops causes problem because
BD70528_MASK_BUCK_RAMP (0x10) overlaps with BD70528_MASK_LDO_VOLT (0x1f).
So setting ramp_delay for LDOs may change the voltage output, fix it.

Fixes: 99ea37bd1e7d ("regulator: bd70528: Support ROHM BD70528 regulator block")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/bd70528-regulator.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c
index ec764022621f..5bf8a2dc5fe7 100644
--- a/drivers/regulator/bd70528-regulator.c
+++ b/drivers/regulator/bd70528-regulator.c
@@ -101,7 +101,6 @@ static const struct regulator_ops bd70528_ldo_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = bd70528_set_ramp_delay,
};

static const struct regulator_ops bd70528_led_ops = {
--
2.20.1
\
 
 \ /
  Last update: 2020-01-01 03:24    [W:0.041 / U:25.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site