[lkml]   [2019]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v4 1/3] PCI: pciehp: Add support for disabling in-band presence

On 11/26/19 8:19 PM, Stuart Hayes wrote:
> On Tue, Nov 26, 2019 at 7:36 PM Bjorn Helgaas <> wrote:
>> On Fri, Oct 25, 2019 at 03:00:45PM -0400, Stuart Hayes wrote:
>>> From: Alexandru Gagniuc <>
>>> The presence detect state (PDS) is normally a logical or of in-band and
>>> out-of-band presence. As of PCIe 4.0, there is the option to disable
>>> in-band presence so that the PDS bit always reflects the state of the
>>> out-of-band presence.
>>> The recommendation of the PCIe spec is to disable in-band presence
>>> whenever supported.
>> I think I'm fine with this patch, but I would like to include the
>> specific reference for this recommendation. If you have it handy, I
>> can just insert it.
> The PCI Express Base Specification Revision 5.0, Version 1.0, in the
> implementation note under Appendix I ("Async Hot-Plug Reference
> Model"), it says "If OOB PD is being used and the associated DSP
> supports In-Band PD Disable, it is recommended that the In-Band PD
> Disable bit be Set, ..."

Is that what you were looking for? Please let me know if there's anything
else I can do to help.

 \ /
  Last update: 2019-12-31 23:07    [W:0.056 / U:4.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site