lkml.org 
[lkml]   [2019]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/3] dt-bindings: phy: Add lane<n>-mode property to WIZ (SERDES wrapper)
From
Date
On 24/12/2019 23:31, Rob Herring wrote:
> On Fri, Dec 20, 2019 at 5:52 AM Jyri Sarha <jsarha@ti.com> wrote:
>>
>> On 19/12/2019 21:08, Rob Herring wrote:
>>> On Mon, Dec 09, 2019 at 06:22:11PM +0200, Jyri Sarha wrote:
>>>> Add property to indicate the usage of SERDES lane controlled by the
>>>> WIZ wrapper. The wrapper configuration has some variation depending on
>>>> how each lane is going to be used.
>>>>
>>>> Signed-off-by: Jyri Sarha <jsarha@ti.com>
>>>> ---
>>>> .../devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 12 ++++++++++++
>>>> 1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
>>>> index 94e3b4b5ed8e..399725f65278 100644
>>>> --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
>>>> +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
>>>> @@ -97,6 +97,18 @@ patternProperties:
>>>> Torrent SERDES should follow the bindings specified in
>>>> Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
>>>>
>>>> + "^lane[1-4]-mode$":
>>>> + allOf:
>>>> + - $ref: /schemas/types.yaml#/definitions/uint32
>>>> + - enum: [0, 1, 2, 3, 4, 5, 6]
>>>> + description: |
>>>> + Integer describing static lane usage for the lane indicated in
>>>> + the property name. For Sierra there may be properties lane0 and
>>>> + lane1, for Torrent all lane[1-4]-mode properties may be
>>>> + there. The constants to indicate the lane usage are defined in
>>>> + "include/dt-bindings/phy/phy.h". The lane is assumed to be unused
>>>> + if its lane<n>-use property does not exist.
>>>
>>> The defines were intended to be in 'phys' cells. Does putting both lane
>>> and mode in the client 'phys' properties not work?
>>>
>>
>> Let me first check if I understood you. So you are suggesting something
>> like this:
>>
>> dp-phy {
>> #phy-cells = <5>; /* 1 for phy-type and 4 for lanes = 5 */
>> ...
>> };
>>
>> dp-bridge {
>> ...
>> phys = <&dp-phy PHY_TYPE_DP 1 1 0 0>; /* lanes 0 and 1 for DP */
>
> Yes, but I think the lanes can be a single cell mask. And I'd probably
> make that the first cell which is generally "which PHY" and make
> type/mode the 2nd cell. I'd look for other users of PHY_TYPE_ defines
> and match what they've done if possible.
>

I see. This will cause some head ache on the driver implementation side,
as there is no way for the phy driver to peek the lane use or type from
the phy client's device tree node. It also looks to me that the phy
API[1] has to be extended quite a bit before the phy client can pass the
lane usage information to the phy driver. It will cause some pain to
implement the extension without breaking the phy API and causing a nasty
cross dependency over all the phy client domains.

Also, there is not much point in putting the PHY_TYPE constant to the
phy client's node, as normally the phy client driver will know quite
well what PHY_TYPE to use. E.g. a SATA driver will always select
PHY_TYPE_SATA and a PCIE driver will select PHY_TYPE_PCIE, etc.

Kishon, if we have to take this road it also starts to sound like we
will have to move the phy client's phandle to point to the phy wrapper
node, if we want to keep the actual phy driver wrapper agnostic. Then we
can make the wrapper to act like a proxy that forwards the phy_ops calls
to the actual phy driver. Luckily the per lane phy-type selection is not
a blocker for our j721e DisplayPort functionality.

Best regards,
Jyri

[1] include/linux/phy/phy.h


--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-12-30 10:39    [W:0.046 / U:3.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site