lkml.org 
[lkml]   [2019]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/2] scsi: ufs: set device as default active power mode during initialization only
On 2019-12-31 09:07, Stanley Chu wrote:
> Hi Asutosh,
>
>
>> I see that there's a get_sync done before.
>> So, how would the suspend be triggered in that case?
>>
>
> Would you mean pm_runtime_get_sync() in ufshcd_init()?
> If yes, it will only happen during initialization.
>
> The runtime resume path may go through ufshcd_probe_hba() without
> ufshcd_init() invoked before, for example,
>
> ufshcd_probe_hba+0xe10/0x1874
> ufshcd_host_reset_and_restore+0x114/0x1a4
> ufshcd_resume+0x1d0/0x480
> ufshcd_runtime_resume+0x40/0x188
> ufshcd_pltfrm_runtime_resume+0x10/0x18
> pm_generic_runtime_resume+0x24/0x44
> __rpm_callback+0x100/0x250
> rpm_resume+0x548/0x7c8
> rpm_resume+0x2b4/0x7c8
> rpm_resume+0x2b4/0x7c8
> rpm_resume+0x2b4/0x7c8
> pm_runtime_work+0x9c/0xa0
> process_one_work+0x210/0x4e0
> worker_thread+0x390/0x520
> kthread+0x154/0x18c
> ret_from_fork+0x10/0x18
>
> This case happens if link is in "off" state while resume.
>
> Thanks,
> Stanley

Hi Stanley,

I see skipping ufshcd_set_ufs_dev_active() in ufshcd_probe_hba()
if it is called from ufshcd_resume() path is the purpose here.

If so, then ufshcd_set_dev_pwr_mode() would be called, meaning
SSU command will be sent. Why is this SSU command needed to be
sent after a full host reset and restore? Is ufshcd_probe_hba()
not enough to make UFS device fully functional?

<snip>
} else if (ufshcd_is_link_off(hba)) {
ret = ufshcd_host_reset_and_restore(hba);
/*
* ufshcd_host_reset_and_restore() should have already
* set the link state as active
*/
if (ret || !ufshcd_is_link_active(hba))
goto vendor_suspend;
}

if (!ufshcd_is_ufs_dev_active(hba)) {
ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
if (ret)
goto set_old_link_state;
}
<snip>

Thanks,

Can Guo.

\
 
 \ /
  Last update: 2019-12-31 03:15    [W:0.052 / U:10.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site