lkml.org 
[lkml]   [2019]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/2] scsi: ufs: set device as default active power mode during initialization only
Hi Stanley,

On 2019-12-30 00:12, Stanley Chu wrote:
> Currently ufshcd_probe_hba() always sets device status as "active".
> This shall be by an assumption that device is already in active state
> during the boot stage before kernel.
>
> However, if link is configured as "off" state and device is requested
> to enter "sleep" or "powerdown" power mode during suspend flow, device
> will NOT be waken up to "active" power mode during resume flow because
> device is already set as "active" power mode in ufhcd_probe_hba().
>
> Fix it by setting device as default active power mode during
> initialization only, and skipping changing mode during PM flow
> in ufshcd_probe_hba().
>
> Fixes: 7caf489b99a4 (scsi: ufs: issue link starup 2 times if device
> isn't active)
> Cc: Alim Akhtar <alim.akhtar@samsung.com>
> Cc: Avri Altman <avri.altman@wdc.com>
> Cc: Bart Van Assche <bvanassche@acm.org>
> Cc: Bean Huo <beanhuo@micron.com>
> Cc: Can Guo <cang@codeaurora.org>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>
> Cc: Subhash Jadavani <subhashj@codeaurora.org>
> Cc: stable@vger.kernel.org
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
> drivers/scsi/ufs/ufshcd.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index ed02a704c1c2..9abb7085a5d0 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -6986,7 +6986,8 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
> ufshcd_tune_unipro_params(hba);
>
> /* UFS device is also active now */
> - ufshcd_set_ufs_dev_active(hba);
> + if (!hba->pm_op_in_progress)
> + ufshcd_set_ufs_dev_active(hba);
> ufshcd_force_reset_auto_bkops(hba);
> hba->wlun_dev_clr_ua = true;

I see that there's a get_sync done before.
So, how would the suspend be triggered in that case?

Thanks,
asd

\
 
 \ /
  Last update: 2019-12-31 00:25    [W:0.048 / U:5.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site