lkml.org 
[lkml]   [2019]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] usb: host: Enable compile testing for some of drivers
Date
Some of the USB host drivers can be compile tested to increase build
coverage. Add 'if' conditional to 'default y' so they will not get
enabled by default on all other architectures.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/usb/host/Kconfig | 54 ++++++++++++++++++++--------------------
1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8d730180db06..da14a3d16b57 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -186,7 +186,7 @@ config USB_EHCI_FSL

config USB_EHCI_MXC
tristate "Support for Freescale i.MX on-chip EHCI USB controller"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
select USB_EHCI_ROOT_HUB_TT
---help---
Variation of ARC USB block used in some Freescale chips.
@@ -210,8 +210,8 @@ config USB_EHCI_HCD_OMAP

config USB_EHCI_HCD_ORION
tristate "Support for Marvell EBU on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU)
- default y
+ depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST)
+ default y if (PLAT_ORION || ARCH_MVEBU)
---help---
Enables support for the on-chip EHCI controller on Marvell's
embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
@@ -221,15 +221,15 @@ config USB_EHCI_HCD_ORION

config USB_EHCI_HCD_SPEAR
tristate "Support for ST SPEAr on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && PLAT_SPEAR
- default y
+ depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
+ default y if PLAT_SPEAR
---help---
Enables support for the on-chip EHCI controller on
ST SPEAr chips.

config USB_EHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip EHCI USB controller"
- depends on ARCH_STI && OF
+ depends on (ARCH_STI || COMPILE_TEST) && OF
select GENERIC_PHY
select USB_EHCI_HCD_PLATFORM
help
@@ -238,8 +238,8 @@ config USB_EHCI_HCD_STI

config USB_EHCI_HCD_AT91
tristate "Support for Atmel on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && ARCH_AT91
- default y
+ depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST)
+ default y if ARCH_AT91
---help---
Enables support for the on-chip EHCI controller on
Atmel chips.
@@ -263,20 +263,20 @@ config USB_EHCI_HCD_PPC_OF

config USB_EHCI_SH
bool "EHCI support for SuperH USB controller"
- depends on SUPERH
+ depends on SUPERH || COMPILE_TEST
---help---
Enables support for the on-chip EHCI controller on the SuperH.
If you use the PCI EHCI controller, this option is not necessary.

config USB_EHCI_EXYNOS
tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on ARCH_S5PV210 || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
help
Enable support for the Samsung Exynos SOC's on-chip EHCI controller.

config USB_EHCI_MV
tristate "EHCI support for Marvell PXA/MMP USB controller"
- depends on (ARCH_PXA || ARCH_MMP)
+ depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
select USB_EHCI_ROOT_HUB_TT
---help---
Enables support for Marvell (including PXA and MMP series) on-chip
@@ -289,7 +289,7 @@ config USB_EHCI_MV

config USB_CNS3XXX_EHCI
bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
- depends on ARCH_CNS3XXX
+ depends on ARCH_CNS3XXX || COMPILE_TEST
select USB_EHCI_HCD_PLATFORM
---help---
This option is deprecated now and the driver was removed, use
@@ -309,7 +309,7 @@ config USB_EHCI_HCD_PLATFORM

config USB_OCTEON_EHCI
bool "Octeon on-chip EHCI support (DEPRECATED)"
- depends on CAVIUM_OCTEON_SOC
+ depends on CAVIUM_OCTEON_SOC || COMPILE_TEST
select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USB_EHCI_HCD_PLATFORM
help
@@ -410,15 +410,15 @@ config USB_OHCI_HCD_OMAP1

config USB_OHCI_HCD_SPEAR
tristate "Support for ST SPEAr on-chip OHCI USB controller"
- depends on USB_OHCI_HCD && PLAT_SPEAR
- default y
+ depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
+ default y if PLAT_SPEAR
---help---
Enables support for the on-chip OHCI controller on
ST SPEAr chips.

config USB_OHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip OHCI USB controller"
- depends on ARCH_STI && OF
+ depends on (ARCH_STI || COMPILE_TEST) && OF
select GENERIC_PHY
select USB_OHCI_HCD_PLATFORM
help
@@ -427,8 +427,8 @@ config USB_OHCI_HCD_STI

config USB_OHCI_HCD_S3C2410
tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
- depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
- default y
+ depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
+ default y if (ARCH_S3C24XX || ARCH_S3C64XX)
---help---
Enables support for the on-chip OHCI controller on
S3C24xx/S3C64xx chips.
@@ -453,17 +453,17 @@ config USB_OHCI_HCD_PXA27X

config USB_OHCI_HCD_AT91
tristate "Support for Atmel on-chip OHCI USB controller"
- depends on USB_OHCI_HCD && ARCH_AT91 && OF
- default y
+ depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF
+ default y if ARCH_AT91
---help---
Enables support for the on-chip OHCI controller on
Atmel chips.

config USB_OHCI_HCD_OMAP3
tristate "OHCI support for OMAP3 and later chips"
- depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
+ depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
select USB_OHCI_HCD_PLATFORM
- default y
+ default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
help
This option is deprecated now and the driver was removed, use
USB_OHCI_HCD_PLATFORM instead.
@@ -473,10 +473,10 @@ config USB_OHCI_HCD_OMAP3

config USB_OHCI_HCD_DAVINCI
tristate "OHCI support for TI DaVinci DA8xx"
- depends on ARCH_DAVINCI_DA8XX
+ depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
depends on USB_OHCI_HCD
select PHY_DA8XX_USB
- default y
+ default y if ARCH_DAVINCI_DA8XX
help
Enables support for the DaVinci DA8xx integrated OHCI
controller. This driver cannot currently be a loadable
@@ -532,7 +532,7 @@ config USB_OHCI_HCD_SSB

config USB_OHCI_SH
bool "OHCI support for SuperH USB controller (DEPRECATED)"
- depends on SUPERH
+ depends on SUPERH || COMPILE_TEST
select USB_OHCI_HCD_PLATFORM
---help---
This option is deprecated now and the driver was removed, use
@@ -543,13 +543,13 @@ config USB_OHCI_SH

config USB_OHCI_EXYNOS
tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on ARCH_S5PV210 || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
help
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.

config USB_CNS3XXX_OHCI
bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
- depends on ARCH_CNS3XXX
+ depends on ARCH_CNS3XXX || COMPILE_TEST
select USB_OHCI_HCD_PLATFORM
---help---
This option is deprecated now and the driver was removed, use
--
2.17.1
\
 
 \ /
  Last update: 2019-12-30 18:22    [W:0.037 / U:12.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site