lkml.org 
[lkml]   [2019]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V1 1/2] dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
On 2019-11-27 14:31, Sibi Sankar wrote:
> Hey Odelu,
>
> On 2019-11-26 20:31, Odelu Kukatla wrote:
>> The Qualcomm SC7180 platform has several bus fabrics that could be
>> controlled and tuned dynamically according to the bandwidth demand.
>>
>> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
>> ---
>> .../bindings/interconnect/qcom,bcm-voter.yaml | 1 +
>> .../bindings/interconnect/qcom,sc7180.yaml | 155
>> +++++++++++++++++++++
>> include/dt-bindings/interconnect/qcom,sc7180.h | 149
>> ++++++++++++++++++++
>> 3 files changed, 305 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
>> create mode 100644 include/dt-bindings/interconnect/qcom,sc7180.h
>>
>> diff --git
>> a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
>> b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
>> index 74f0715..55c9f34 100644
>> ---
>> a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
>> +++
>> b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
>> @@ -19,6 +19,7 @@ description: |
>> properties:
>> compatible:
>> enum:
>> + - qcom,sc7180-bcm-voter
>> - qcom,sdm845-bcm-voter
>>
>> required:
>> diff --git
>> a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
>> b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
>> new file mode 100644
>> index 0000000..487da5e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
>> @@ -0,0 +1,155 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm SC7180 Network-On-Chip Interconnect
>> +
>
> seems to be same as the SDM845
> icc description can't we just
> re-use/add it to that?
>
No, NoC topology is different b/w SDM845 and SC7180. we need to have
separate file for SC7180.
>> +maintainers:
>> + - David Dai <daidavid1@codeaurora.org>
>> +
>> +description: |
>> + SC7180 interconnect providers support system bandwidth
>> requirements through
>> + RPMh hardware accelerators known as Bus Clock Manager (BCM). The
>> provider is
>> + able to communicate with the BCM through the Resource State
>> Coordinator (RSC)
>> + associated with each execution environment. Provider nodes must
>> point to at
>> + least one RPMh device child node pertaining to their RSC and each
>> provider
>> + can map to multiple RPMh resources.
>> +
>> +properties:
>> + reg:
>> + maxItems: 1
>> +
>> + compatible:
>> + enum:
>> + - qcom,sc7180-aggre1-noc
>> + - qcom,sc7180-aggre2-noc
>> + - qcom,sc7180-camnoc-virt
>> + - qcom,sc7180-compute-noc
>> + - qcom,sc7180-config-noc
>> + - qcom,sc7180-dc-noc
>> + - qcom,sc7180-gem-noc
>> + - qcom,sc7180-ipa-virt
>> + - qcom,sc7180-mc-virt
>> + - qcom,sc7180-mmss-noc
>> + - qcom,sc7180-npu-noc
>> + - qcom,sc7180-qup-virt
>> + - qcom,sc7180-system-noc
>> +
>> + '#interconnect-cells':
>> + const: 1
>> +
>> + qcom,bcm-voters:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + description: |
>> + List of phandles to qcom,bcm-voter nodes that are required by
>> + this interconnect to send RPMh commands.
>> +
>> + qcom,bcm-voter-names:
>> + $ref: /schemas/types.yaml#/definitions/string-array
>> + description: |
>> + Names for each of the qcom,bcm-voters specified.
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - '#interconnect-cells'
>> + - qcom,bcm-voters
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interconnect/qcom,sc7180.h>
>> +
>> + config_noc: interconnect@1500000 {
>> + compatible = "qcom,sc7180-config-noc";
>> + reg = <0 0x01500000 0 0x28000>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + system_noc: interconnect@1620000 {
>> + compatible = "qcom,sc7180-system-noc";
>> + reg = <0 0x01620000 0 0x17080>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + mc_virt: interconnect@1630000 {
>> + compatible = "qcom,sc7180-mc-virt";
>> + reg = <0 0x01630000 0 0x4000>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + qup_virt: interconnect@1650000 {
>> + compatible = "qcom,sc7180-qup-virt";
>> + reg = <0 0x01650000 0 0x4000>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + aggre1_noc: interconnect@16e0000 {
>> + compatible = "qcom,sc7180-aggre1-noc";
>> + reg = <0 0x016e0000 0 0x15080>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + aggre2_noc: interconnect@1700000 {
>> + compatible = "qcom,sc7180-aggre2-noc";
>> + reg = <0 0x01700000 0 0x1f880>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + compute_noc: interconnect@170e000 {
>> + compatible = "qcom,sc7180-compute-noc";
>> + reg = <0 0x0170e000 0 0x11880>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + mmss_noc: interconnect@1740000 {
>> + compatible = "qcom,sc7180-mmss-noc";
>> + reg = <0 0x01740000 0 0x1c100>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + ipa_virt: interconnect@1e00000 {
>> + compatible = "qcom,sc7180-ipa-virt";
>> + reg = <0 0x01e00000 0 0x4000>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + dc_noc: interconnect@9160000 {
>> + compatible = "qcom,sc7180-dc-noc";
>> + reg = <0 0x09160000 0 0x03200>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + gem_noc: interconnect@9680000 {
>> + compatible = "qcom,sc7180-gem-noc";
>> + reg = <0 0x09680000 0 0x3e200>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + npu_noc: interconnect@9990000 {
>> + compatible = "qcom,sc7180-npu-noc";
>> + reg = <0 0x09990000 0 0x1600>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + camnoc_virt: interconnect@ac00000 {
>> + compatible = "qcom,sc7180-camnoc-virt";
>> + reg = <0 0x0ac00000 0 0x4000>;
>> + #interconnect-cells = <1>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> diff --git a/include/dt-bindings/interconnect/qcom,sc7180.h
>> b/include/dt-bindings/interconnect/qcom,sc7180.h
>> new file mode 100644
>> index 0000000..b762bc3
>> --- /dev/null
>> +++ b/include/dt-bindings/interconnect/qcom,sc7180.h
>> @@ -0,0 +1,149 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Qualcomm SC7180 interconnect IDs
>> + *
>> + * Copyright (c) 2019, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SC7180_H
>> +#define __DT_BINDINGS_INTERCONNECT_QCOM_SC7180_H
>
> Please use local ids instead, the
> following way of defining nodes will
> lead to unnecessarily large array
> sizes.
>
I will fix it. Thank you!
>> +
>> +#define MASTER_APPSS_PROC 0
>> +#define MASTER_SYS_TCU 1
>> +#define MASTER_NPU_SYS 2
>> +#define MASTER_IPA_CORE 3
>> +#define MASTER_LLCC 4
>> +#define MASTER_A1NOC_CFG 5
>> +#define MASTER_A2NOC_CFG 6
>> +#define MASTER_CNOC_DC_NOC 7
>> +#define MASTER_GEM_NOC_CFG 8
>> +#define MASTER_CNOC_MNOC_CFG 9
>> +#define MASTER_NPU_NOC_CFG 10
>> +#define MASTER_QDSS_BAM 11
>> +#define MASTER_QSPI 12
>> +#define MASTER_QUP_0 13
>> +#define MASTER_QUP_1 14
>> +#define MASTER_SNOC_CFG 15
>> +#define MASTER_A1NOC_SNOC 16
>> +#define MASTER_A2NOC_SNOC 17
>> +#define MASTER_COMPUTE_NOC 18
>> +#define MASTER_GEM_NOC_SNOC 19
>> +#define MASTER_MNOC_HF_MEM_NOC 20
>> +#define MASTER_MNOC_SF_MEM_NOC 21
>> +#define MASTER_NPU 22
>> +#define MASTER_SNOC_CNOC 23
>> +#define MASTER_SNOC_GC_MEM_NOC 24
>> +#define MASTER_SNOC_SF_MEM_NOC 25
>> +#define MASTER_QUP_CORE_0 26
>> +#define MASTER_QUP_CORE_1 27
>> +#define MASTER_CAMNOC_HF0 28
>> +#define MASTER_CAMNOC_HF1 29
>> +#define MASTER_CAMNOC_HF0_UNCOMP 30
>> +#define MASTER_CAMNOC_HF1_UNCOMP 31
>> +#define MASTER_CAMNOC_SF 32
>> +#define MASTER_CAMNOC_SF_UNCOMP 33
>> +#define MASTER_CRYPTO 34
>> +#define MASTER_GFX3D 35
>> +#define MASTER_IPA 36
>> +#define MASTER_MDP0 37
>> +#define MASTER_NPU_PROC 38
>> +#define MASTER_PIMEM 39
>> +#define MASTER_ROTATOR 40
>> +#define MASTER_VIDEO_P0 41
>> +#define MASTER_VIDEO_PROC 42
>> +#define MASTER_QDSS_DAP 43
>> +#define MASTER_QDSS_ETR 44
>> +#define MASTER_SDCC_2 45
>> +#define MASTER_UFS_MEM 46
>> +#define MASTER_USB3 47
>> +#define MASTER_EMMC 48
>> +#define SLAVE_EBI1 512
>
> Shouldn't the node ids be just
> sequential?
>
I will address it.
>> +#define SLAVE_IPA_CORE 513
>> +#define SLAVE_A1NOC_CFG 514
>> +#define SLAVE_A2NOC_CFG 515
>> +#define SLAVE_AHB2PHY_SOUTH 516
>> +#define SLAVE_AHB2PHY_CENTER 517
>> +#define SLAVE_AOP 518
>> +#define SLAVE_AOSS 519
>> +#define SLAVE_APPSS 520
>> +#define SLAVE_BOOT_ROM 521
>> +#define SLAVE_NPU_CAL_DP0 522
>> +#define SLAVE_CAMERA_CFG 523
>> +#define SLAVE_CAMERA_NRT_THROTTLE_CFG 524
>> +#define SLAVE_CAMERA_RT_THROTTLE_CFG 525
>> +#define SLAVE_CLK_CTL 526
>> +#define SLAVE_NPU_CP 527
>> +#define SLAVE_RBCPR_CX_CFG 528
>> +#define SLAVE_RBCPR_MX_CFG 529
>> +#define SLAVE_CRYPTO_0_CFG 530
>> +#define SLAVE_DCC_CFG 531
>> +#define SLAVE_CNOC_DDRSS 532
>> +#define SLAVE_DISPLAY_CFG 533
>> +#define SLAVE_DISPLAY_RT_THROTTLE_CFG 534
>> +#define SLAVE_DISPLAY_THROTTLE_CFG 535
>> +#define SLAVE_NPU_INT_DMA_BWMON_CFG 536
>> +#define SLAVE_NPU_DPM 537
>> +#define SLAVE_EMMC_CFG 538
>> +#define SLAVE_GEM_NOC_CFG 539
>> +#define SLAVE_GLM 540
>> +#define SLAVE_GFX3D_CFG 541
>> +#define SLAVE_IMEM_CFG 542
>> +#define SLAVE_IPA_CFG 543
>> +#define SLAVE_ISENSE_CFG 544
>> +#define SLAVE_LLCC_CFG 545
>> +#define SLAVE_NPU_LLM_CFG 546
>> +#define SLAVE_MSS_PROC_MS_MPU_CFG 547
>> +#define SLAVE_CNOC_MNOC_CFG 548
>> +#define SLAVE_CNOC_MSS 549
>> +#define SLAVE_NPU_CFG 550
>> +#define SLAVE_NPU_DMA_BWMON_CFG 551
>> +#define SLAVE_NPU_PROC_BWMON_CFG 552
>> +#define SLAVE_PDM 553
>> +#define SLAVE_PIMEM_CFG 554
>> +#define SLAVE_PRNG 555
>> +#define SLAVE_QDSS_CFG 556
>> +#define SLAVE_QM_CFG 557
>> +#define SLAVE_QM_MPU_CFG 558
>> +#define SLAVE_QSPI_0 559
>> +#define SLAVE_QUP_0 560
>> +#define SLAVE_QUP_1 561
>> +#define SLAVE_SDCC_2 562
>> +#define SLAVE_SECURITY 563
>> +#define SLAVE_SNOC_CFG 564
>> +#define SLAVE_NPU_TCM 565
>> +#define SLAVE_TCSR 566
>> +#define SLAVE_TLMM_WEST 567
>> +#define SLAVE_TLMM_NORTH 568
>> +#define SLAVE_TLMM_SOUTH 569
>> +#define SLAVE_UFS_MEM_CFG 570
>> +#define SLAVE_USB3 571
>> +#define SLAVE_VENUS_CFG 572
>> +#define SLAVE_VENUS_THROTTLE_CFG 573
>> +#define SLAVE_VSENSE_CTRL_CFG 574
>> +#define SLAVE_A1NOC_SNOC 575
>> +#define SLAVE_A2NOC_SNOC 576
>> +#define SLAVE_CAMNOC_UNCOMP 577
>> +#define SLAVE_CDSP_GEM_NOC 578
>> +#define SLAVE_SNOC_CNOC 579
>> +#define SLAVE_GEM_NOC_SNOC 580
>> +#define SLAVE_SNOC_GEM_NOC_GC 581
>> +#define SLAVE_SNOC_GEM_NOC_SF 582
>> +#define SLAVE_LLCC 583
>> +#define SLAVE_MNOC_HF_MEM_NOC 584
>> +#define SLAVE_MNOC_SF_MEM_NOC 585
>> +#define SLAVE_NPU_COMPUTE_NOC 586
>> +#define SLAVE_QUP_CORE_0 587
>> +#define SLAVE_QUP_CORE_1 588
>> +#define SLAVE_IMEM 589
>> +#define SLAVE_PIMEM 590
>> +#define SLAVE_SERVICE_A1NOC 591
>> +#define SLAVE_SERVICE_A2NOC 592
>> +#define SLAVE_SERVICE_CNOC 593
>> +#define SLAVE_SERVICE_GEM_NOC 594
>> +#define SLAVE_SERVICE_MNOC 595
>> +#define SLAVE_SERVICE_NPU_NOC 596
>> +#define SLAVE_SERVICE_SNOC 597
>> +#define SLAVE_QDSS_STM 598
>> +#define SLAVE_TCU 599
>> +
>> +#endif

\
 
 \ /
  Last update: 2019-12-30 12:48    [W:0.065 / U:18.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site