lkml.org 
[lkml]   [2019]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch V3 14/18] arm64: tegra: update OTG port entries for jetson-tx2
Date
Add usb-role-switch entry to OTG usb port and add corresponding connector
details.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V2-V3:
- No changes in this version
---
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index f1de4ff..a1dcdb9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -174,8 +174,20 @@
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <&vdd_usb0>;
+
+ usb-role-switch;
+ connector {
+ compatible = "usb-b-connector",
+ "gpio-usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ vbus-gpio = <&gpio
+ TEGRA186_MAIN_GPIO(X, 7)
+ GPIO_ACTIVE_LOW>;
+ id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
+
};

usb2-1 {
--
2.7.4
\
 
 \ /
  Last update: 2019-12-30 12:15    [W:0.127 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site