lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 026/321] can: peak_usb: report bus recovery as well
Date
From: Jeroen Hofstee <jhofstee@victronenergy.com>

[ Upstream commit 128a1b87d3ceb2ba449d5aadb222fe22395adeb0 ]

While the state changes are reported when the error counters increase
and decrease, there is no event when the bus recovers and the error
counters decrease again. So add those as well.

Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING ->
ERROR_ACTIVE instead of directly to ERROR_ACTIVE again.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/peak_usb/pcan_usb.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
index 61f33c2fb1cd7..215cd74800df4 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -444,8 +444,8 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n,
}
if ((n & PCAN_USB_ERROR_BUS_LIGHT) == 0) {
/* no error (back to active state) */
- mc->pdev->dev.can.state = CAN_STATE_ERROR_ACTIVE;
- return 0;
+ new_state = CAN_STATE_ERROR_ACTIVE;
+ break;
}
break;

@@ -468,9 +468,9 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n,
}

if ((n & PCAN_USB_ERROR_BUS_HEAVY) == 0) {
- /* no error (back to active state) */
- mc->pdev->dev.can.state = CAN_STATE_ERROR_ACTIVE;
- return 0;
+ /* no error (back to warning state) */
+ new_state = CAN_STATE_ERROR_WARNING;
+ break;
}
break;

@@ -509,6 +509,11 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n,
mc->pdev->dev.can.can_stats.error_warning++;
break;

+ case CAN_STATE_ERROR_ACTIVE:
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = CAN_ERR_CRTL_ACTIVE;
+ break;
+
default:
/* CAN_STATE_MAX (trick to handle other errors) */
cf->can_id |= CAN_ERR_CRTL;
--
2.20.1


\
 
 \ /
  Last update: 2019-12-03 23:46    [W:0.837 / U:5.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site