lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 013/321] clk: at91: avoid sleeping early
Date
From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 658fd65cf0b0d511de1718e48d9a28844c385ae0 ]

It is not allowed to sleep to early in the boot process and this may lead
to kernel issues if the bootloader didn't prepare the slow clock and main
clock.

This results in the following error and dump stack on the AriettaG25:
bad: scheduling from the idle thread!

Ensure it is possible to sleep, else simply have a delay.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20190920153906.20887-1-alexandre.belloni@bootlin.com
Fixes: 80eded6ce8bb ("clk: at91: add slow clks driver")
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/at91/clk-main.c | 5 ++++-
drivers/clk/at91/sckc.c | 20 ++++++++++++++++----
2 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 2f97a843d6d6b..fb5c14af8cc8d 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -354,7 +354,10 @@ static int clk_main_probe_frequency(struct regmap *regmap)
regmap_read(regmap, AT91_CKGR_MCFR, &mcfr);
if (mcfr & AT91_PMC_MAINRDY)
return 0;
- usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT);
+ if (system_state < SYSTEM_RUNNING)
+ udelay(MAINF_LOOP_MIN_WAIT);
+ else
+ usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT);
} while (time_before(prep_time, timeout));

return -ETIMEDOUT;
diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
index ab6ecefc49ad8..43ba2a8b03faf 100644
--- a/drivers/clk/at91/sckc.c
+++ b/drivers/clk/at91/sckc.c
@@ -74,7 +74,10 @@ static int clk_slow_osc_prepare(struct clk_hw *hw)

writel(tmp | AT91_SCKC_OSC32EN, sckcr);

- usleep_range(osc->startup_usec, osc->startup_usec + 1);
+ if (system_state < SYSTEM_RUNNING)
+ udelay(osc->startup_usec);
+ else
+ usleep_range(osc->startup_usec, osc->startup_usec + 1);

return 0;
}
@@ -197,7 +200,10 @@ static int clk_slow_rc_osc_prepare(struct clk_hw *hw)

writel(readl(sckcr) | AT91_SCKC_RCEN, sckcr);

- usleep_range(osc->startup_usec, osc->startup_usec + 1);
+ if (system_state < SYSTEM_RUNNING)
+ udelay(osc->startup_usec);
+ else
+ usleep_range(osc->startup_usec, osc->startup_usec + 1);

return 0;
}
@@ -310,7 +316,10 @@ static int clk_sam9x5_slow_set_parent(struct clk_hw *hw, u8 index)

writel(tmp, sckcr);

- usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1);
+ if (system_state < SYSTEM_RUNNING)
+ udelay(SLOWCK_SW_TIME_USEC);
+ else
+ usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1);

return 0;
}
@@ -443,7 +452,10 @@ static int clk_sama5d4_slow_osc_prepare(struct clk_hw *hw)
return 0;
}

- usleep_range(osc->startup_usec, osc->startup_usec + 1);
+ if (system_state < SYSTEM_RUNNING)
+ udelay(osc->startup_usec);
+ else
+ usleep_range(osc->startup_usec, osc->startup_usec + 1);
osc->prepared = true;

return 0;
--
2.20.1


\
 
 \ /
  Last update: 2019-12-03 23:45    [W:0.821 / U:2.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site