lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.3 079/135] net/mlx5e: Use correct enum to determine uplink port
Date
From: Dmytro Linkin <dmitrolin@mellanox.com>

[ Upstream commit 950d3af70ea89cf7ac51d734a634174013631192 ]

For vlan push action, if eswitch flow source capability is enabled, flow
source value compared with MLX5_VPORT_UPLINK enum, to determine uplink
port. This lead to syndrome in dmesg if try to add vlan push action.
For example:
$ tc filter add dev vxlan0 ingress protocol ip prio 1 flower \
enc_dst_port 4789 \
action tunnel_key unset pipe \
action vlan push id 20 pipe \
action mirred egress redirect dev ens1f0_0
$ dmesg
...
[ 2456.883693] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 5273): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa9c090)
Use the correct enum value MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK.

Fixes: bb204dcf39fe ("net/mlx5e: Determine source port properly for vlan push action")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
index 7879e1746297c..366bda1bb1c32 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
@@ -183,7 +183,8 @@ static bool mlx5_eswitch_offload_is_uplink_port(const struct mlx5_eswitch *esw,
u32 port_mask, port_value;

if (MLX5_CAP_ESW_FLOWTABLE(esw->dev, flow_source))
- return spec->flow_context.flow_source == MLX5_VPORT_UPLINK;
+ return spec->flow_context.flow_source ==
+ MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK;

port_mask = MLX5_GET(fte_match_param, spec->match_criteria,
misc_parameters.source_port);
--
2.20.1


\
 
 \ /
  Last update: 2019-12-03 23:42    [W:0.455 / U:10.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site