lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] TTY/Serial patches for 5.5-rc1
The following changes since commit d6d5df1db6e9d7f8f76d2911707f7d5877251b02:

Linux 5.4-rc5 (2019-10-27 13:19:19 -0400)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-5.5-rc1

for you to fetch changes up to 27ed14d0ecb38516b6f3c6fdcd62c25c9454f979:

Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices" (2019-11-27 14:24:13 +0100)

----------------------------------------------------------------
TTY/Serial patches for 5.5-rc1

Here is the "big" tty and serial driver patches for 5.5-rc1. It's a bit
later in the merge window than normal as I wanted to make sure some
last-minute patches applied to it were all sane. They seem to be :)

There's a lot of little stuff in here, for the tty core, and for lots of
serial drivers:
- reverts of uartlite serial driver patches that were wrong
- msm-serial driver fixes
- serial core updates and fixes
- tty core fixes
- serial driver dma mapping api changes
- lots of other tiny fixes and updates for serial drivers

All of these have been in linux-next for a while with no reported
issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

----------------------------------------------------------------
Akash Asthana (2):
tty: serial: qcom_geni_serial: IRQ cleanup
tty: serial: qcom_geni_serial: Wakeup over UART RX

Andrey Smirnov (1):
dt-bindings: serial: lpuart: Drop unsupported RS485 bindings

Andy Shevchenko (3):
serial: 8250_dw: Use devm_clk_get_optional() to get the input clock
serial: 8250_exar: Move Exar pieces to custom ->startup()
serial: 8250_dw: Avoid double error messaging when IRQ absent

Ben Dooks (1):
serial: sirf: make register info static

Chuhong Yuan (2):
tty: serial: uartlite: use clk_disable_unprepare to match clk_prepare_enable
serial: ifx6x60: add missed pm_runtime_disable

Dmitry Torokhov (1):
tty: vt: keyboard: reject invalid keycodes

Fabrice Gasnier (1):
serial: stm32: fix clearing interrupt error flags

Felipe Balbi (1):
serial: 8250_lpss: Switch over to MSI interrupts

Frank Wunderlich (1):
serial: 8250-mtk: Use platform_get_irq_optional() for optional irq

Geert Uytterhoeven (1):
dt-bindings: serial: sh-sci: Document r8a77961 bindings

Greg Kroah-Hartman (9):
Merge 5.4-rc3 into tty-next
Merge 5.4-rc5 into tty-next
Revert "tty:n_gsm.c: destroy port by tty_port_destroy()"
Revert "serial-uartlite: Use allocated structure instead of static ones"
Revert "serial-uartlite: Change logic how console_port is setup"
Revert "serial-uartlite: Add runtime support"
Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
Revert "serial-uartlite: Add get serial id if not provided"
Revert "serial-uartlite: Move the uart register"

Heiko Schocher (1):
tty: 8250_of: Use software emulated RS485 direction control

Je Yen Tam (1):
Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"

Jeffrey Hugo (1):
tty: serial: msm_serial: Fix flow control

Jiangfeng Xiao (1):
serial: serial_core: Perform NULL checks for break_ctl ops

Jiri Slaby (1):
tty: don't crash in tty_init_dev when missing tty_port

Krzysztof Kozlowski (2):
tty: Fix Kconfig indentation
tty: Fix Kconfig indentation, continued

Lanqing Liu (1):
serial: sprd: Add polling IO support

Maximilian Luz (1):
serdev: Add ACPI devices by ResourceSource field

Michal Simek (3):
serial: core: Use cons->index for preferred console registration
hvc: dcc: Add earlycon support
Revert "serial: core: Use cons->index for preferred console registration"

Nicolas Pitre (1):
vcs: prevent write access to vcsu devices

Oskar Senft (3):
drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable
dt-bindings: serial: 8250: Add aspeed,sirq-polarity-sense.
arm: dts: aspeed: Add vuart aspeed,sirq-polarity-sense to aspeed-g5.dtsi

Pascal Terjan (1):
Remove every trace of SERIAL_MAGIC

Pavel Machek (1):
tty_ldisc: simplify tty_ldisc_autoload initialization

Peng Fan (3):
tty: serial: fsl_lpuart: use the sg count from dma_map_sg
tty: serial: imx: use the sg count from dma_map_sg
tty: serial: pch_uart: correct usage of dma_unmap_sg

Peter Ujfalusi (3):
tty: serial: amba-pl011: Use dma_request_chan() directly for channel request
tty: serial: tegra: Use dma_request_chan() directly for channel request
tty: serial: msm_serial: Use dma_request_chan() directly for channel request

Philipp Puschmann (1):
serial: imx: adapt rx buffer and dma periods

Philippe Schenker (3):
tty: serial: lpuart: Remove unnecessary code from set_mctrl
tty: serial: lpuart: Use defines that correspond to correct register
tty: serial: lpuart: Add RS485 support for 32-bit uart flavour

Qian Cai (1):
tty/amba-pl011: fix a -Wunused-function warning

Shubhrajyoti Datta (2):
serial-uartlite: Change logic how console_port is setup
serial-uartlite: Use allocated structure instead of static ones

Stefan-Gabriel Mirea (1):
serial: fsl_linflexuart: Be consistent with the name

Sudip Mukherjee (3):
tty: rocket: reduce stack usage
{tty: serial, nand: onenand}: samsung: rename to fix build warning
tty: remove unused argument from tty_open_by_driver()

Vincent Whitchurch (1):
serial: pl011: Fix DMA ->flush_buffer()

Xiaoming Ni (1):
tty:n_gsm.c: destroy port by tty_port_destroy()

Documentation/ABI/stable/sysfs-driver-aspeed-vuart | 11 +-
Documentation/admin-guide/kernel-parameters.txt | 2 +-
Documentation/devicetree/bindings/serial/8250.txt | 5 +
.../devicetree/bindings/serial/fsl-lpuart.txt | 3 +-
.../bindings/serial/renesas,sci-serial.txt | 6 +-
Documentation/process/magic-number.rst | 1 -
.../translations/it_IT/process/magic-number.rst | 1 -
.../translations/zh_CN/process/magic-number.rst | 1 -
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
drivers/mtd/nand/onenand/Makefile | 2 +-
.../mtd/nand/onenand/{samsung.c => samsung_mtd.c} | 0
drivers/net/wan/z85230.h | 2 -
drivers/tty/Kconfig | 40 +--
drivers/tty/amiserial.c | 84 ------
drivers/tty/hvc/Kconfig | 28 +-
drivers/tty/hvc/hvc_dcc.c | 28 ++
drivers/tty/rocket.c | 32 ++-
drivers/tty/serdev/core.c | 111 +++++++-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 84 ++++++
drivers/tty/serial/8250/8250_dw.c | 83 +++---
drivers/tty/serial/8250/8250_exar.c | 19 ++
drivers/tty/serial/8250/8250_lpss.c | 21 +-
drivers/tty/serial/8250/8250_mtk.c | 2 +-
drivers/tty/serial/8250/8250_of.c | 31 +++
drivers/tty/serial/8250/8250_pci.c | 292 +--------------------
drivers/tty/serial/8250/8250_port.c | 14 -
drivers/tty/serial/8250/Kconfig | 3 +-
drivers/tty/serial/Kconfig | 104 ++++----
drivers/tty/serial/Makefile | 2 +-
drivers/tty/serial/amba-pl011.c | 12 +-
drivers/tty/serial/fsl_linflexuart.c | 4 +-
drivers/tty/serial/fsl_lpuart.c | 84 ++++--
drivers/tty/serial/ifx6x60.c | 3 +
drivers/tty/serial/imx.c | 7 +-
drivers/tty/serial/msm_serial.c | 10 +-
drivers/tty/serial/pch_uart.c | 5 +-
drivers/tty/serial/qcom_geni_serial.c | 68 ++++-
drivers/tty/serial/{samsung.c => samsung_tty.c} | 0
drivers/tty/serial/serial-tegra.c | 3 +-
drivers/tty/serial/serial_core.c | 2 +-
drivers/tty/serial/sirfsoc_uart.h | 5 +-
drivers/tty/serial/sprd_serial.c | 33 +++
drivers/tty/serial/stm32-usart.c | 6 +-
drivers/tty/serial/uartlite.c | 97 ++-----
drivers/tty/tty_io.c | 14 +-
drivers/tty/tty_ldisc.c | 7 +-
drivers/tty/vt/keyboard.c | 2 +-
drivers/tty/vt/vc_screen.c | 3 +
include/uapi/linux/serial_core.h | 2 +-
49 files changed, 665 insertions(+), 715 deletions(-)
rename drivers/mtd/nand/onenand/{samsung.c => samsung_mtd.c} (100%)
rename drivers/tty/serial/{samsung.c => samsung_tty.c} (100%)

\
 
 \ /
  Last update: 2019-12-03 21:30    [W:0.023 / U:2.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site