lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
From
Date

> Am 03.12.2019 um 16:58 schrieb H. Nikolaus Schaller <hns@goldelico.com>:
>
>
>> Am 03.12.2019 um 16:44 schrieb Tony Lindgren <tony@atomide.com>:
>>
>> * H. Nikolaus Schaller <hns@goldelico.com> [191203 12:31]:
>>> Ok, dev_pm_opp_find_freq_ceil() is doing what it should do and it
>>> returns the first OPP higher or equal than the frequency passed in.
>>>
>>> The real reason for the warning is that the same OPP table is used
>>> for vdd_mpu_iva and vdd_core and it appears as if "core" (l3_ick)
>>> runs at 200 MHz which does not correspond to a valid OPP.
>>
>> OK
>>
>>> So to silcence the warning it suffices to remove
>>>
>>> omap2_set_init_voltage("core", "l3_ick", "l3_main");
>>>
>>> The question is now what l3_ick has to do with the OPPs at all
>>> and how it should interwork with OPPs and cpufreq.
>>
>> So what changed then for iva in your configuration then?
>>
>> At least I'm getting errors for both for 34xx and dm3730 with
>> Linux next and reverted commit cf395f7ddb9e ("ARM: OMAP2+: Fix
>> warnings with broken omap2_set_init_voltage()"):
>>
>> omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
>> omap2_set_init_voltage: unable to set vdd_mpu_iva
>> omap2_set_init_voltage: unable to find boot up OPP for vdd_core
>> omap2_set_init_voltage: unable to set vdd_core
>
> Hm... Is there maybe a dependency on u-boot?
>
> We are using a quite old version which may boot with vdd_mpu_iva
> as 300 MHz while yours may have a different clock.
>
> What we could do is augment the printk (or dev_err) to tell
> in these warnings what it is looking for...
>
> opp = dev_pm_opp_find_freq_ceil(dev, &freq);
> if (IS_ERR(opp)) {
> pr_err("%s: unable to find boot up OPP for vdd_%s freq %ulHz\n",
> __func__, vdd_name, freq);
> goto exit;
> }

Easier and always prints info:

freq = clk_get_rate(clk);
clk_put(clk);

pr_info("%s: vdd=%s clk=%s %luHz oh=%s\n", __func__, vdd_name, clk_name, freq, oh_name);

opp = dev_pm_opp_find_freq_ceil(dev, &freq);

I get this:

[ 2.908142] omap2_set_init_voltage: vdd=mpu_iva clk=dpll1_ck 1000000000Hz oh=mpu
[ 2.930816] omap2_set_init_voltage: vdd=core clk=l3_ick 200000000Hz oh=l3_main
[ 2.946228] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 2.953460] omap2_set_init_voltage: unable to set vdd_core

Which means that cpufreq already has increased dpll1_ck to 1 GHz
(I have removed the turbo-mode tags so that it already boots at
full speed) and l3_ick runs at initial 200 MHz.

>
>> Then for fixing this code, seems like this can all happen from
>> a regular device driver init based on the dts data.. We've had
>> PM init completely ignore these errors already for years so
>> whatever dependency there might be seems non-critical :)
>>
>>> Or does all this mean we may need a second OPP fable for vdd_core
>>> and 200 MHz? But what would it be good for? I have not seen any
>>> reference for "core-OPPs" in the TRM.
>>
>> OK yeah sounds like all the domains need an opp table.
>>
>> Also, I recall some SoCs having a dependency between having to
>> run DSP at a lower rate for higher MPU rates, not sure if omap3
>> has such dependencies though.
>
> Well, I not aware of documentation of such dependencies and there
> is also some confusion what vdd_mpu_iva exactly is and what vdd_core is.
> twl4030 has vdd1 and vdd2 but their relationship isn't clear either.
>
> Maybe Tero or Nisanth can clarify?
>
> BR and thanks,
> Nikolaus
>
>
> _______________________________________________
> http://projects.goldelico.com/p/gta04-kernel/
> Letux-kernel mailing list
> Letux-kernel@openphoenux.org
> http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel

\
 
 \ /
  Last update: 2019-12-03 17:55    [W:0.100 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site