lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 2/2] thermal: armada-thermal: clear reset in armadaxp_init
Date
Hi Miquèl,

>The format of your patch is strange, there are additional empty lines
>which are problematic.

Apologies for the formatting. I'll try to fix that in that next patch set.

>Do you really want to write this register twice? Shouldn't you get rid
>of the first regmap_write() above?

I'm writing the register twice in order to pulse the reset line and ensure the block is reset at init. This is similar to what was done in the driver previously:

/* Reset the sensor */
reg = readl_relaxed(priv->control1);
writel((reg | PMU_TDC0_SW_RST_MASK), priv->control1); <= Set the reset bit

writel(reg, priv->control1); <= Immediately clear the bit

I'm a little unsure that setting then immediately clearing reset is enough time for the block to do a full reset but I can't find anything in AXP's documentation to indicate a correct reset time. As such, I just emulated the original process from earlier kernel versions. If you believe that a udelay should be added, I can add one in the next patch set.

Thanks!
Zak


________________________________________
From: Miquel Raynal <miquel.raynal@bootlin.com>
Sent: Wednesday, November 27, 2019 6:00 AM
To: Zak Hays
Cc: Zhang Rui; Eduardo Valentin; Daniel Lezcano; Amit Kucheria; linux-pm@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] thermal: armada-thermal: clear reset in armadaxp_init

Hi Zak,

Zak Hays <zak.hays@lexmark.com> wrote on Tue, 26 Nov 2019 14:54:11
+0000:

> The reset bit needs to be cleared in the init sequence otherwise it
>
> holds the block in reset.

"thermal: armada: " is the right prefix for your title

Your Signed-off-by should be here (git commit --amend -s)

The format of your patch is strange, there are additional empty lines
which are problematic.

>
> ---
>
> drivers/thermal/armada_thermal.c | 3 +++
>
> 1 file changed, 3 insertions(+)
>
>
>
> diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
>
> index 88363812033c..8c4d1244ee7a 100644
>
> --- a/drivers/thermal/armada_thermal.c
>
> +++ b/drivers/thermal/armada_thermal.c
>
> @@ -155,6 +155,9 @@ static void armadaxp_init(struct platform_device *pdev,
>
>
>
> regmap_write(priv->syscon, data->syscon_control1_off, reg);
>
>
>
> + reg &= ~PMU_TDC0_SW_RST_MASK;
>
> + regmap_write(priv->syscon, data->syscon_control1_off, reg);
>
> +

Do you really want to write this register twice? Shouldn't you get rid
of the first regmap_write() above?

>
> /* Enable the sensor */
>
> regmap_read(priv->syscon, data->syscon_status_off, &reg);
>
> reg &= ~PMU_TM_DISABLE_MASK;
>

In your next iteration, please use the '-v2' option with
git-format-patch to get titles starting with "[PATCH v2 x/2] ..."
automatically. Also write a changelog below the three dots '---'.

Thanks,
Miquèl

\
 
 \ /
  Last update: 2019-12-03 17:38    [W:0.056 / U:47.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site