lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [v1,ethtool] ethtool: add setting frame preemption of traffic classes
On Wed, Nov 27, 2019 at 09:58:52AM +0000, Po Liu wrote:

Hi Po Liu,

>IEEE Std 802.1Qbu standard defined the frame preemption of port
>trffic classes. User can set a value to hardware. The value will
>be translated to a binary, each bit represent a traffic class.
>Bit "1" means preemptable traffic class. Bit "0" means express
>traffic class. MSB represent high number traffic class.
>
>ethtool -k devname
>
>This command would show if the tx-preemption feature is available.
>If hareware set preemption feature. The property would be a fixed
>value 'on' if hardware support the frame preemption. Feature would
>show a fixed value 'off' if hardware don't support the frame preemption.
>
>ethtool devname
>
>This command would show include an item 'preemption'. A following
>value '0' means all traffic classes are 'express'. A value none zero
>means traffic classes preemption capabilities. The value will be
>translated to a binary, each bit represent a traffic class. Bit '1'
>means preemptable traffic class. Bit '0' means express traffic class.
>MSB represent high number traffic class.
>
>ethtool -s devname preemption N

What about other potential parameters like MAC fragment size, mac hold?
Shouldn't be it considered along with other FP parameters to provide correct
interface later?

Say, preemption, lets name it fp-mask or frame-preemption-mask.
Then other potential setting can be similar and added later:

frame-preemption-mask
frame-preemption-fragsize
frame-preemption-machold
....

mac-hold it's rather flag, at least I've used it as priv-flag.
so can or so

frame-preemption-flags

>
>This command would set which traffic classes are frame preemptable.
>The value will be translated to a binary, each bit represent a
>traffic class. Bit '1' means preemptable traffic class. Bit '0'
>means express traffic class. MSB represent high number traffic class.
>
>Signed-off-by: Po Liu <Po.Liu@nxp.com>
>---
> ethtool-copy.h | 6 +++++-
> ethtool.8.in | 8 ++++++++
> ethtool.c | 18 ++++++++++++++++++
> 3 files changed, 31 insertions(+), 1 deletion(-)
>
>diff --git a/ethtool-copy.h b/ethtool-copy.h
>index 9afd2e6..e04bdf3 100644
>--- a/ethtool-copy.h
>+++ b/ethtool-copy.h
>@@ -1662,6 +1662,9 @@ static __inline__ int ethtool_validate_duplex(__u8 duplex)
> #define AUTONEG_DISABLE 0x00
> #define AUTONEG_ENABLE 0x01
>
>+/* Disable preemtion. */
>+#define PREEMPTION_DISABLE 0x0
>+
> /* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
> * the driver is required to renegotiate link
> */
>@@ -1878,7 +1881,8 @@ struct ethtool_link_settings {
> __s8 link_mode_masks_nwords;
> __u8 transceiver;
> __u8 reserved1[3];
>- __u32 reserved[7];
>+ __u32 preemption;
>+ __u32 reserved[6];
> __u32 link_mode_masks[0];
> /* layout of link_mode_masks fields:
> * __u32 map_supported[link_mode_masks_nwords];
>diff --git a/ethtool.8.in b/ethtool.8.in
>index 062695a..7d612b2 100644
>--- a/ethtool.8.in
>+++ b/ethtool.8.in
>@@ -236,6 +236,7 @@ ethtool \- query or control network driver and hardware settings
> .B2 autoneg on off
> .BN advertise
> .BN phyad
>+.BN preemption
> .B2 xcvr internal external
> .RB [ wol \ \*(WO]
> .RB [ sopass \ \*(MA]
>@@ -703,6 +704,13 @@ lB l lB.
> .BI phyad \ N
> PHY address.
> .TP
>+.BI preemption \ N
>+Set preemptable traffic classes by bits.
>+.B A
>+value will be translated to a binary, each bit represent a traffic class.
>+Bit "1" means preemptable traffic class. Bit "0" means express traffic class.
>+MSB represent high number traffic class.
>+.TP
> .A2 xcvr internal external
> Selects transceiver type. Currently only internal and external can be
> specified, in the future further types might be added.
>diff --git a/ethtool.c b/ethtool.c
>index acf183d..d5240f8 100644
>--- a/ethtool.c
>+++ b/ethtool.c
>@@ -928,6 +928,12 @@ dump_link_usettings(const struct ethtool_link_usettings *link_usettings)
> }
> }
>
>+ if (link_usettings->base.preemption == PREEMPTION_DISABLE)
>+ fprintf(stdout, " Preemption: 0x0 (off)\n");
>+ else
>+ fprintf(stdout, " Preemption: 0x%x\n",
>+ link_usettings->base.preemption);
>+
> return 0;
> }
>
>@@ -2869,6 +2875,7 @@ static int do_sset(struct cmd_context *ctx)
> int port_wanted = -1;
> int mdix_wanted = -1;
> int autoneg_wanted = -1;
>+ int preemption_wanted = -1;
> int phyad_wanted = -1;
> int xcvr_wanted = -1;
> u32 *full_advertising_wanted = NULL;
>@@ -2957,6 +2964,12 @@ static int do_sset(struct cmd_context *ctx)
> } else {
> exit_bad_args();
> }
>+ } else if (!strcmp(argp[i], "preemption")) {
>+ gset_changed = 1;
>+ i += 1;
>+ if (i >= argc)
>+ exit_bad_args();
>+ preemption_wanted = get_u32(argp[i], 16);
> } else if (!strcmp(argp[i], "advertise")) {
> gset_changed = 1;
> i += 1;
>@@ -3094,6 +3107,9 @@ static int do_sset(struct cmd_context *ctx)
> }
> if (autoneg_wanted != -1)
> link_usettings->base.autoneg = autoneg_wanted;
>+ if (preemption_wanted != -1)
>+ link_usettings->base.preemption
>+ = preemption_wanted;
> if (phyad_wanted != -1)
> link_usettings->base.phy_address = phyad_wanted;
> if (xcvr_wanted != -1)
>@@ -3186,6 +3202,8 @@ static int do_sset(struct cmd_context *ctx)
> fprintf(stderr, " not setting transceiver\n");
> if (mdix_wanted != -1)
> fprintf(stderr, " not setting mdix\n");
>+ if (preemption_wanted != -1)
>+ fprintf(stderr, " not setting preemption\n");
> }
> }
>
>--
>2.17.1
>

--
Regards,
Ivan Khoronzhuk

\
 
 \ /
  Last update: 2019-12-03 17:27    [W:0.054 / U:11.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site