Messages in this thread Patch in this message |  | | From | Andrew Jeffery <> | Subject | [PATCH 03/14] ARM: dts: aspeed-g5: Move EDAC node to APB | Date | Tue, 3 Dec 2019 22:34:04 +1030 |
| |
Previously the register interface was not attached to any internal bus, which is not correct - it lives on the APB.
Cc: Stefan M Schaeckeler <sschaeck@cisco.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com> --- arch/arm/boot/dts/aspeed-g5.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index a8ce59a3c88d..edad1fd78925 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -47,13 +47,6 @@ reg = <0x80000000 0>; }; - edac: sdram@1e6e0000 { - compatible = "aspeed,ast2500-sdram-edac"; - reg = <0x1e6e0000 0x174>; - interrupts = <0>; - status = "disabled"; - }; - ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -213,6 +206,13 @@ #size-cells = <1>; ranges; + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + status = "disabled"; + }; + syscon: syscon@1e6e2000 { compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; -- git-series 0.9.1
|  |