lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hidraw: Fix returning EPOLLOUT from hidraw_poll
Date
When polling a connected /dev/hidrawX device, it is useful to get the
EPOLLOUT when writing is possible. Since writing is possible as soon as
the device is connected, always return it.

Right now EPOLLOUT is only returned when there are also input reports
are available. This works if devices start sending reports when
connected, but some HID devices might need an output report first before
sending any input reports. This change will allow using EPOLLOUT here as
well.

Fixes: 378b80370aa1 ("hidraw: Return EPOLLOUT from hidraw_poll")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
---
drivers/hid/hidraw.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index bbc6ec1aa5cb..c25e95c19cad 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -252,10 +252,10 @@ static __poll_t hidraw_poll(struct file *file, poll_table *wait)

poll_wait(file, &list->hidraw->wait, wait);
if (list->head != list->tail)
- return EPOLLIN | EPOLLRDNORM | EPOLLOUT;
+ return EPOLLIN | EPOLLRDNORM;
if (!list->hidraw->exist)
return EPOLLERR | EPOLLHUP;
- return 0;
+ return EPOLLOUT | EPOLLWRNORM;
}

static int hidraw_open(struct inode *inode, struct file *file)
--
2.23.0
\
 
 \ /
  Last update: 2019-12-04 03:38    [W:0.026 / U:3.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site