lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 40/46] r8169: fix resume on cable plug-in
Date
From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 398fd408ccfb5e44b1cbe73a209d2281d3efa83c ]

It was reported [0] that network doesn't wake up on cable plug-in with
certain chip versions. Reason is that on these chip versions the PHY
doesn't detect cable plug-in when being in power-down mode. So prevent
the PHY from powering down if WoL is enabled.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202103

Fixes: 95fb8bb3181b ("net: phy: force phy suspend when calling phy_stop")
Reported-by: jhdskag3 <jhdskag3@tutanota.com>
Tested-by: jhdskag3 <jhdskag3@tutanota.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/realtek/r8169_main.c | 1 +
1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -1516,6 +1516,7 @@ static void __rtl8169_set_wol(struct rtl
rtl_lock_config_regs(tp);

device_set_wakeup_enable(tp_to_dev(tp), wolopts);
+ tp->dev->wol_enabled = wolopts ? 1 : 0;
}

static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)

\
 
 \ /
  Last update: 2019-12-04 00:13    [W:0.204 / U:29.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site