lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.3 111/135] mdio_bus: dont use managed reset-controller
Date
From: David Bauer <mail@david-bauer.net>

[ Upstream commit 32085f25d7b68404055f3525c780142fc72e543f ]

Geert Uytterhoeven reported that using devm_reset_controller_get leads
to a WARNING when probing a reset-controlled PHY. This is because the
device devm_reset_controller_get gets supplied is not actually the
one being probed.

Acquire an unmanaged reset-control as well as free the reset_control on
unregister to fix this.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/mdio_bus.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -66,8 +66,8 @@ static int mdiobus_register_reset(struct
struct reset_control *reset = NULL;

if (mdiodev->dev.of_node)
- reset = devm_reset_control_get_exclusive(&mdiodev->dev,
- "phy");
+ reset = of_reset_control_get_exclusive(mdiodev->dev.of_node,
+ "phy");
if (IS_ERR(reset)) {
if (PTR_ERR(reset) == -ENOENT || PTR_ERR(reset) == -ENOTSUPP)
reset = NULL;
@@ -111,6 +111,8 @@ int mdiobus_unregister_device(struct mdi
if (mdiodev->bus->mdio_map[mdiodev->addr] != mdiodev)
return -EINVAL;

+ reset_control_put(mdiodev->reset_ctrl);
+
mdiodev->bus->mdio_map[mdiodev->addr] = NULL;

return 0;

\
 
 \ /
  Last update: 2019-12-04 00:10    [W:0.305 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site