lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 049/321] scsi: lpfc: Fix dif and first burst use in write commands
Date
From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 7c4042a4d0b7532cfbc90478fd3084b2dab5849e ]

When dif and first burst is used in a write command wqe, the driver was not
properly setting fields in the io command request. This resulted in no dif
bytes being sent and invalid xfer_rdy's, resulting in the io being aborted
by the hardware.

Correct the wqe initializaton when both dif and first burst are used.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/lpfc/lpfc_scsi.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 666495f21c246..425b83618a2e5 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -2732,6 +2732,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
int prot_group_type = 0;
int fcpdl;
+ struct lpfc_vport *vport = phba->pport;

/*
* Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
@@ -2837,6 +2838,14 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
*/
iocb_cmd->un.fcpi.fcpi_parm = fcpdl;

+ /*
+ * For First burst, we may need to adjust the initial transfer
+ * length for DIF
+ */
+ if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+ (fcpdl < vport->cfg_first_burst_size))
+ iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
return 0;
err:
if (lpfc_cmd->seg_cnt)
@@ -3401,6 +3410,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
int prot_group_type = 0;
int fcpdl;
+ struct lpfc_vport *vport = phba->pport;

/*
* Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
@@ -3516,6 +3526,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
*/
iocb_cmd->un.fcpi.fcpi_parm = fcpdl;

+ /*
+ * For First burst, we may need to adjust the initial transfer
+ * length for DIF
+ */
+ if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+ (fcpdl < vport->cfg_first_burst_size))
+ iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
/*
* If the OAS driver feature is enabled and the lun is enabled for
* OAS, set the oas iocb related flags.
--
2.20.1


\
 
 \ /
  Last update: 2019-12-04 00:07    [W:0.977 / U:4.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site