lkml.org 
[lkml]   [2019]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/8] arm64: dts: qcom: qcs404: Add IMEM and PIL info region
Date
Add a simple-mfd representing IMEM on QCS404 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- None

arch/arm64/boot/dts/qcom/qcs404.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index f5f0c4c9cb16..9d2a2b1c64dd 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -890,6 +890,16 @@ blsp2_spi0: spi@7af5000 {
status = "disabled";
};

+ imem@8600000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x08600000 0x1000>;
+
+ pil-reloc {
+ compatible ="qcom,pil-reloc-info";
+ offset = <0x94c>;
+ };
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
2.24.0
\
 
 \ /
  Last update: 2019-12-27 06:34    [W:0.109 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site